sanking
Member
Problem is there is very little in the way of "prime" lenses in these focal lengths. In fact, there's nothing in "primes" longer than 550mm - assuming you consider the 550mm Fine Art XXL a prime. For modern plasmats, there's nothing longer than 480mm.
The only modern lenses this long are the Nikkor 600/800/1200 T-ED and Schneider 600/800 APO Tele-Xenar telephoto sets - which have a lot less coverage than non-telephoto designs of the same focal length - and the 600mm Fujinon C and 1100mm Schneider Fine Art XXL , which both happen to be Artar-type designs.
Even though they were optimized for 1:1, the Artars perform very, very well at infinity. Late shutter mounted Artars were even factory adjusted for smaller reproduction ratios (up to 20:1, depending on the focal length - the same as most modern "prime" lenses).
I was lucky enough to recently acquire a late model 42" Red Dot Artar in exceptional condition for about 15% of what a new 1100mm Fine Art XL would cost. I doubt if I'll be able to tell any difference in 14x17 contact prints - at least not $4000 worth.
nd in the 42" focal length the coverage is "more than I'll ever need". Even if I use the very conservative 46 degrees of coverage, the image circle comes out to over 900mm in the 42" focal length. That's enough to cover 20x24 with over 100mm to spare - and that's a conservative figure or this lens.
Kerry
I never understood the logic of the Schneider 1100mm Fine Art XL lens since there are so many nice process lenses around in this focal length, including nice coated models. One could buy a 42" Red Dot Artar and have it put in Ilex 5 shutter for around $2k.
The 550mm Schneider Dagor, on the other hand, is a very special and unique lens. The only thing comparable, except for some truly exotic glass, is a 24" Dagor. And most likely that would be uncoated and not in a shutter. I once owned a 19" Dagor in Betax shutter, but the 550 Schneider Dagor is in a class of its own compared to the old Dagors.
Sandy King