Beseler Pinhole Camera aperture size?

[Trask]

Does anyone know the aperture size of the pinhole that is part of the Beseler make-your-own 120 pinhole camera? Knowing would help me better calculate exposures. Thanks.

 

[Terry Breedlove]

Take some test shots at varies shutter times and develop the film. Do this at high noon on a sunny day. lets say your hand held meter reads f16 at 125th of a second and your best shot was at four seconds when you viewed the developed film. That is your base now all you have to do is double the exposure time for every stop below the base. One stop under = 8 seconds two stops under equal 16 seconds etc.

 

[Ric Johnson]

Terry is right. Then write yourself a exposure chart, keep it with your camera, and refer to it every time. Mr. Pinhole also can give you an exposure chart: http://www.mrpinhole.com/exposure.php

 

[Trask]

Thanks! I was hoping to avoid having to actually determine proper exposure time by testing a roll, but hey, at least I'd be taking pictures.

 

[RegorV]

Just found this post. The box says 0.3 mm

 

[ced]

RegorV has the correct data!