davido
Allowing Ads
I purchased these bellows for my Wista 45 field camera, from a seller on Ebay. The bellows are the correct size for the Wista 45 frames, however they were not made properly and are not long enough for full extension of the camera bed. They would be fine for landscapes with the Wista 45 OR they could be used on a custom DIY camera? I just don't want them to go to waste and so selling very reasonably.
The bellows were glued to frames, but they were not used.
The size is 4 x 4 inch and 5 x 5 inch. There are 18 folds. They compress to around 3/4 inch and extend to approximately 7 inches (comfortably).
Info from the original ad:
Professional Made Bellows For Wista 45D 45VX 45N 45SP 45RF Large Format Camera
Material: Two layers synthetic fiber cloth with special coating to avoid light leakage
$25 plus shipping
The bellows were glued to frames, but they were not used.
The size is 4 x 4 inch and 5 x 5 inch. There are 18 folds. They compress to around 3/4 inch and extend to approximately 7 inches (comfortably).
Info from the original ad:
Professional Made Bellows For Wista 45D 45VX 45N 45SP 45RF Large Format Camera
Material: Two layers synthetic fiber cloth with special coating to avoid light leakage
$25 plus shipping
