Automatic home film processor

[Pegajoy]

Thanks jeyes. Then it is too small for me. I will check do disassemble my Jobo and implement an additional switch that puts the pump off.

 

[koraks]

an additional switch that puts the pump off.

And the heating element.

 

[Pegajoy]

Yes. I can turn the temperature wheel to the minimum, but a switch is more safe. And if I have it anyway open, I will add a flowing off pipe, cause there is no.

 

[koraks]

Yeah, makes sense. I've used my CPE2 many times with the thermostat dialed all the way down. Works OK. It doesn't have a built-in pump; I have a small fish tank circulation pump I use with it if I do color on it. I rarely use it though.

 

[halfaman]

It seems that both processors are designed for film only and paper is not considered. So I will be tied to Jobo for the rest of my RA-4 life...

One curiosity. I checked chemicals volume requiered in the dev.a machine are they are high for me considering it uses Jobo 1500 reels. A Jobo 1520 tank (two 120 or 35 mm rolls) requires 250 ml on rotary processing, dev.a uses 500 ml for the same ammount of film; A Jobo 1520+1530 tank (five 35 mm rolls or six 120 rolls) requires 570 ml, dev.a uses 1 liter to process six rolls of 120. dev.a uses 1 liter. With 1 liter (900 ml really) I can process ten 120 rolls or eight 35 mm rolls in a Jobo 1520+1530+1530 tank.

 

[paddycook]

Jeff, it's a nice machine and I do enjoy using mine. Just did a couple of E-6 8x10 sheets this afternoon and they came out perfect.

Where can you buy them? Do you have to order them directly from the manufacturer?

 

[Model71]

Where can you buy them? Do you have to order them directly from the manufacturer?

@paddycook the distributor for this hemisphere is CatLabs, https://www.catlabs.info/category/film-and-print-processors

 

[Model71]

For reference, the product manufacturer, https://analogico.adel2000.it/deva-details/