Are any of the older 13x19 printers capable of BO (black only) prints?

[jtk]

One of the most amazing inkjet prints I've seen hung in Santa Fe Museum.... maybe 4 feet long, brown pigment on a very rough Tibetian (?) paper.

The photographer/artist had created her own pigments for Epson using oak galls...boiling them for a long time the way weavers sometimes do. I have no idea how much grief her Epson may have experienced but my then-wife had also used oak galls that way. Made a wonderful mess, was fabulously successful.

 

[Alan9940]

I make black and white prints using a Canon PRO-100 too, in my case on Hahnemuhle FineArt Baryta Satin. Have you tried that paper? If so, how would you say it compares to Big Bend Baryta 310, especially in terms of surface gloss? Thanks in advance.

In the past I've used that paper and just happen to still have a box with a few sheets in it. Viewing a sheet of the Hahnemuhle FineArt Baryta Satin next to a sheet of RR Big Bend Baryta 310 in an indirect daylight lit room, I offer the following observations:

1. Big Bend Baryta is quite a bit whiter vs the Hahnemuhle paper; the latter taking on that "yellow" warm base color.

2. The surface gloss of BBB is noticeably glossier vs the Hahnemuhle, but nowhere near the gloss look of typical RC glossy papers.

3. In the hand, the weight of both papers feels the same, though I believe the Hahnemuhle paper is ever so slightly thinner.

Since I tone my B&W prints to a warm sepia, the BBB paper works fine for me and is cheaper than the Hahnemuhle paper. That said, if I had an image requiring a very warm treatment, I wouldn't hesitate to print on the FineArt Baryta Satin paper.

Hope this answers your question.

 

[Sal Santamaura]

...Hope this answers your question.

I does, in an extremely useful way. Thanks again!

 

[jtk]

Hahnemuhle Matt Fibre duo is the warmest inkjet paper I've found.

It's inexpensive.

210 gsm.

H doesn't make any "archival" claims. It may be hard to find.

 

[jtk]

FYI I've just received 50 sheets of Hahnemuhle Matt Fibre duo from IT Supply... ordered it for a project that called for that particular surface/weight/tone in order to go along with prints I'd made in 2019...

This order was placed with IT Supply a few days before Christmas...

...an excellent human being called by telephone from Washington DC to let me know there would be a couple of days delay due to the holiday season. 5 days from order to delivery is GREAT SERVICE