Anyone have any old beaten up Step Wedges they dont mind passing on ?

[nick mulder]

I sure could use one or two

Hope I'm not rude in asking!

Nick

 

[Neil Miller]

Nick - you don't have to have the most expensive step wedges; for instance the Stouffer 21 step is cheaper than the the Stouffer wedges with more steps. The Agfa variety is cheaper still.

Regards,
Neil.

 

[Robert Hall]

Not to mention that since most are done on film, they can degrade over time. I have found mine for cheaper than $20, some even as low as $5 US.

 

[davido]

I got mine directly from Stouffer http://www.stouffer.net/Productlist.htm
It was the most recommended model: T2115 at only $6 each. I bought half a dozen as they are easy to misplace. The calibrated models are much more expensive and more accurate but not really worth the money for most alt applications.

david

 

[donbga]

I sure could use one or two

Hope I'm not rude in asking!

Nick

If you can't afford the step wedges then you can afford to test with them.

 

[nick mulder]

I got mine directly from Stouffer http://www.stouffer.net/Productlist.htm
It was the most recommended model: T2115 at only $6 each. I bought half a dozen as they are easy to misplace. The calibrated models are much more expensive and more accurate but not really worth the money for most alt applications.

david

$6 ~!

I must have my wires crossed as I thought they were much more than that ...
I understand i dont need the full on calibrated ones and was hoping that maybe someone who did had some they thought were no longer accurate/suitable enough for thier particular application ...

at that cost i'll order some direct - yip, I understand that considering the processes i am working in that step wedges are a minimal most compared to the rest of the gear - asking here was done for two reasons ... I'm a little skint at the moment after having bought an 8x10 camera and a truck load of chems and the other reason being I realized i have so much stuff here that I no longer use that i have been passing on to others for little or no cost that maybe i could try a little reverse methodology - still though $6 ...no problem

thanks all!
nick