Any clever methods for flattening curled 35mm film?

Recent Classifieds

Forum statistics

Threads
183,207
Messages
2,540,475
Members
95,768
Latest member
kim in
Recent bookmarks
0

Gerald C Koch

Member
Joined
Jul 12, 2010
Messages
8,141
Location
Southern USA
Format
Multi Format
I only shoot Eastman Double-X now. Absolutely no curl ever. A pleasure to work with

From previous experience with several other films make sure that the film is completely dry. Just because the emulsion side appears to be dry does not mean it is. Use weighted clips and hang for at least 12 hours.
 
Last edited:
OP
OP
js98367

js98367

Member
Joined
Apr 13, 2008
Messages
91
Location
Port, Orchard, WA USA
Format
Multi Format
Original poster's summary:

Thanks to everyone for your responses to my problem.

I have learned that good film drying to avoid curling is all about moisture control.

I hang my film in an upstairs shower to dry. Since heat rises, there is much less humidity on the second floor of my home. So, I ran the shower to create steam and humidity, hung my film then closed the door tight to somewhat seal the bathroom. When I returned three hours later, the film had dried with some but significantly LESS curl. It is now good enough to clear the scanner glass and no longer create Newton's rings on my .jpeg's.

In the same way I adjust the proper temperature of my developing solution, I will now begin to adjust the humidity of my film drying area.

It is usually the application of simple remedies that cut through the confusing details to solve the problem.

John near Seattle
 

Anon Ymous

Member
Joined
Feb 7, 2008
Messages
3,218
Location
Greece
Format
35mm
Any suggestions for film that is curling short-ways?

Emulsion side out at a reel might help for this too. The closer to the centre of the reel, the more effective. You need to leave it there for days. Putting it under weight could also help, but quite frankly I never had a case where this sort of curling was much of a problem. The enlarger carrier, or the scanner's film carrier too care of it.
 

henryyjjames

Subscriber
Joined
Apr 12, 2022
Messages
108
Location
Dublin, Ireland & CT, USA
Format
Multi Format
Emulsion side out at a reel might help for this too. The closer to the centre of the reel, the more effective. You need to leave it there for days. Putting it under weight could also help, but quite frankly I never had a case where this sort of curling was much of a problem. The enlarger carrier, or the scanner's film carrier too care of it.

Yea I know it's less common, but I found that expired films sometimes curl intensely. The scanner I have doesn't have a carrier that flattens the negative.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom