An extra two inches on a Shen Hao

Kodachrome Skies

A
Kodachrome Skies

  • 1
  • 0
  • 97
The Dive

A
The Dive

  • 4
  • 2
  • 133
Edinburgh nights

Edinburgh nights

  • 1
  • 6
  • 187

Recent Classifieds

Forum statistics

Threads
178,731
Messages
2,458,826
Members
94,629
Latest member
swededreams
Recent bookmarks
0

Curt

Member
Joined
Sep 22, 2005
Messages
4,620
Location
Pacific Nort
Shooter
Multi Format
That's right, +2 inches on the stock Shen Hao.

Anyone interested?

How about +4 inches on a stock Shen Hao?

I have that modification, not to the camera because it stays stock, and will show to anyone interested.

Used together it gives the standard 12 inches a 16 inch bellows extension. 14 inches the easy way and with a little work the whole 16 or more depending on your needs.


Curt
 
Last edited by a moderator:
Joined
Mar 23, 2006
Messages
858
Shooter
Multi Format
Either an extension back, or a rail addition, could be useful items for Shen Hao owners. I think Ebony offer an extension back, which avoids needing a longer bellows. Rail extensions could be useful, though only within the range of the original bellows. You might want to post this over at Large Format Forum, which has more Shen Hao users.

Ciao!

Gordon Moat Photography
 

Mike1234

Member
Joined
Jul 6, 2009
Messages
1,908
Location
South Texas,
Shooter
4x5 Format
I think an extension rail is available directly from Shen Hao but I definitely want to see what you've done!! :smile:
 

Laurent

Subscriber
Joined
Oct 15, 2004
Messages
1,521
Location
France
Shooter
Multi Format
Tachihara makes an extension back, I thought about making something similar for mine (may be a simple "box" with fittings for the original back)

I'm sure interested in what you've made
 
OP
OP
Curt

Curt

Member
Joined
Sep 22, 2005
Messages
4,620
Location
Pacific Nort
Shooter
Multi Format
Photos in the morning.
 
OP
OP
Curt

Curt

Member
Joined
Sep 22, 2005
Messages
4,620
Location
Pacific Nort
Shooter
Multi Format
Here are some photos of the two extensions for the Shen Hao camera.
 

Attachments

  • Shen Hao camera extensions.jpg
    Shen Hao camera extensions.jpg
    108.9 KB · Views: 152
Last edited by a moderator:
OP
OP
Curt

Curt

Member
Joined
Sep 22, 2005
Messages
4,620
Location
Pacific Nort
Shooter
Multi Format
The wood for the extension back was Limbala and was a dense textured hardwood of open grain. It was what I found laying around in the shop, it was so hard that I had to use a wood lubrication when I ran it though the planer. The joins are box and very tight, I used guerrilla glue and it was had to sand but turned out extremely strong. The hobby shop provided some brass that the I cut with a hacksaw, drilled and filed then buffed on a huge buffer I have. It's easy to make one but to make a duplicate but in the reverse is more challenging by hand. I pared them up and sized them on a Delta 12 disk wheel holding them in vise grips with cloth to prevent the brass from getting scratched. I made it in three days before leaving for a workshop and everything was done quickly without undue delay. I used tung oil for the finish and it was still smelling from the second coat when I got to the hotel in Tonopah.

I was looking at the camera design and stretched the bellows way out to see what the maximum usable extension was and found that it was a lot longer than the 12 inches of the camera design with its single extension. I looked for a way to design and replace the rails in the back but when I removed the screws I found that the entire assembly could be moved. I moved it back and exposed two screw holes. That was 2 inches and it was very stable. I decided to make a wood block of light weight gum wood to fill the space and add support and it worked better than I originally thought. All of the screws were put back in so there are no extra parts to get lost. I had to route a stop dado into each side for the metal locks on the inside to slide in. It's just like the dado in the camera base as seen with the two blank screw holes. All in all this can be done without the block in a couple of minutes with a small screwdriver. Add the block and get better support.

I'm not fond of the camera because the knobs are too small and it's difficult for me in the cold but it's an OK beginner camera. A 5x7 would with larger knobs would be better and a double extension. I like the knobs on the Chamonix and the hardware is much nicer but that's a different story.

What I've learned by this inspection can be applied to a camera I have wanted to build for some time. I have the parts, including a Canham 5x7 bellows with the metal end plates. I built my first 4x5 field camera out of Cherry and brass by hand and small machinery over thirty years ago. It's a lot like the Shen Hao and has the same problem for me, small knobs and short bellows. I think I've learned enough to make my perfect camera or cameras. The last comment I have about the Shen Hao is the color of the wood, it looks like a sick or bad stain job. I just don't like the color or the choice of wood, it doesn't have any bearing on the function but is an aesthetic issue as is the black painted brass, I bet the brass would be beautiful if stripped and polished. I have gone as far with this camera as I want to go and for what it is it's worth the money. Add an extension back and extend the rails and you get a sturdy 16 inch 4x5 which isn't bad. And the camera actually has the ability to move the rear back and the lens standard forward and add even more extension however this set of movements puts the locks to the extreme and a heavy lens will sag and not be stable and prevent small movements and adjustments.

Thanks for letting me share this with you,
Curt
 

Mick Fagan

Subscriber
Joined
Sep 13, 2005
Messages
3,898
Location
Melbourne Au
Shooter
Multi Format
Curt, very interesting.

Took me a bit to understand what a dado was, a trench or rebated slot in my language:smile:

Thanks for the pictures, nice work by the way!

Mick.
 

Laurent

Subscriber
Joined
Oct 15, 2004
Messages
1,521
Location
France
Shooter
Multi Format
Thanks for sharing !

the rear box is what I'd like to build, but I first need to improve my wood working skills (or build a rig for the router).

The only downside of the Tachihara for me is the bellows draw limit at 330mm, so an extension back looks like a very good idea.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab
Top Bottom