Alt & Lith Print Exchange #2 (ALPX-2) - Status and Updates

RauschenOderKorn · Jul 6, 2019

Dear photographers,

The magic has been done, and the assignments are out. Everybody should have a message from me.

Please check your own address again. Please wait a few days before you send anything. We need that time to correct address problems and other difficulties. If something is or seems to be wrong please PM me.

As this is not a blind print exchange, the "chain" is as follows:

Dali -> piu58 -> jim10219 -> Rlibersky -> Oxleyroad -> RauschenOderKorn -> MrBrowning [if signup is finalized quickly] -> Dali

[This is for information only. Please keep in mind that nobody participating likes to receive a demotivational reminder or a PM saying "Where is my print?". Please don´t do that. If there is a problem, contact me. I will do my best to solve the problem.]

Our timeline:
Print and Send: July and August 2019
Rest and Relaxation: September 2019

If you like, please share your prints in this thread or in the gallery before sending them. Also, please give us a short heads up when you send or receive a print.

Have fun with ALPX-2!

RauschenOderKorn · Jul 7, 2019

MrBrowning is in, so we are seven in this round:

Dali -> piu58 -> jim10219 -> Rlibersky -> Oxleyroad -> RauschenOderKorn -> MrBrowning -> Dali

Oxleyroad · Jul 10, 2019

The more the merrier I say. I still need to hurry up and decide on a) the image, and b) the process or processes I will use.

Rlibersky · Jul 12, 2019

Sent mine out yesterday.

piu58 · Jul 16, 2019

I sent mine out a few days ago.

RauschenOderKorn · Jul 16, 2019

Update:

Sent: 2 / 7 (Rlibersky, piu58)
Received: -

Oxleyroad · Jul 16, 2019

Rec'd on Saturday prints from Rlibersky. Two prints. Remarkably clear print on Kadak 1914 vintage Velox paper. The whites and blacks are so clear for paper so old. Real achievement being able to use the paper without fogging. There was a second print, which was mounted. I just could not pick the process used for this print - Lith...? Any chance of sharing some detail on the location of the image and process used?

RauschenOderKorn · Jul 16, 2019

Update:

Sent: 2 / 7 (Rlibersky, piu58)
Received: 1/7 (Oxleyroad)

Rlibersky · Jul 17, 2019

Oxleyroad said:
Rec'd on Saturday prints from Rlibersky. Two prints. Remarkably clear print on Kadak 1914 vintage Velox paper. The whites and blacks are so clear for paper so old. Real achievement being able to use the paper without fogging. There was a second print, which was mounted. I just could not pick the process used for this print - Lith...? Any chance of sharing some detail on the location of the image and process used?

It is on printing out paper. Contact printed in the sun.. Small manmade river in Mears Park Downton St Paul..

jim10219 · Jul 25, 2019

I received two lith prints from piu58 last week and hadn't had time to update this thread until now. The Agfa MG RC paper had a beautiful warmth to it with very nice midtones, especially for a lith print. The Maco Lithpaper RC-F of a figure in relief flanked by a pair of windows has wonderful symmetry and the dark, rich, almost Van Dyke blacks contrast well with the bright whites. That one is definitely my favorite of the pair!

I sent off my print to Rlibersky today. It's a triple exposure, monotone casein print of some mountains in a field I found in Colorado that I took with some IR film. I ran into some staining issues, especially while trying to expose the shadow tones. In the future, I'll experiment with altering the sizing concentration to scale up with the increasing pigment content. I'm discovering with casein, you have to balance the size, pigment, dichromate, and exposure time, development technique, and negative density. Change one, even just a little, and you have to change the others. Fortunately, they seem to be somewhat predictable (so far).

Rlibersky · Jul 29, 2019

Received a print from jim10219. See above, although the actual print is nicer then the scan. Thanks Jim.

RauschenOderKorn · Jul 30, 2019

Status Update:

Sent: 3/7 (Rlibersky, piu58, jim10219)
Received: 3/7 (Oxleyroad, jim10219,Rlibersky)

Dali · Aug 21, 2019

I sent my prints a couple of days ago.

Oxleyroad · Aug 22, 2019

I have dropped my prints off at the post office this morning.

RauschenOderKorn · Aug 27, 2019

Status Update:

Sent: 5/7 (Rlibersky, piu58, jim10219, Dali, Oxleyroad)
Received: 3/7 (Oxleyroad, jim10219,Rlibersky)

piu58 · Sep 5, 2019

I just received two lith prints from Nicolas. The negative is from the nineties, a very fine shot of a fair in Lyon, France. The two prints are identical, but one of them is selenium toned. It is interesting to see the color shift.

Thank you very much!

RauschenOderKorn · Sep 8, 2019

I have received two wonderful prints from Oxleyroad, thanks you very much!

I have finally had the chance to finish my prints this weekend, which will be in the mail tomorrow!

Status Update:

Sent: 6/7 (Rlibersky, piu58, jim10219, Dali, Oxleyroad, RauschenOderKorn)
Received: 5/7 (Oxleyroad, jim10219,Rlibersky, piu58, RauschenOderKorn)

If you sent or received a print which has not been accounted for yet, please let us know.

Oxleyroad · Sep 8, 2019

Glad to hear the prints arrived.

Dali · Sep 20, 2019

HI,

I received yesterday a couple of 11x14 prints from MrBrowning.

Thanks!

RauschenOderKorn · Sep 22, 2019

Status Update:

Sent: 7/7 (Rlibersky, piu58, jim10219, Dali, Oxleyroad, RauschenOderKorn,MrBrowning)
Received: 6/7 (Oxleyroad, jim10219,Rlibersky, piu58, RauschenOderKorn, Dali)

Now that is one spectacular result. Before then end of the round, all prints have been sent and only one is left in transit. I hope the mail does not take too long any more and MrBrowning will also receive the print from me.

Rlibersky · Sep 30, 2019

I received my print today. Have not had a chance to look at them yet. will do so after work tonight.

RauschenOderKorn · Oct 1, 2019

Randy, if you received a print from me, that one is for the BPX32.

Mr.Browning is the only member still waiting for his print of this round. (which should arrive any minute, as it was sent at the same time)

RauschenOderKorn · Oct 1, 2019

btw: signup for round #3 is online:

https://www.photrio.com/forum/threads/alt-lith-print-exchange-3-signup.170282/

RauschenOderKorn · Feb 4, 2020

Round 4 is open for signup:

https://www.photrio.com/forum/threads/alt-lith-print-exchange-4-signup.172928/

Alt & Lith Print Exchange #2 (ALPX-2) - Status and Updates

Privacy & Transparency

Privacy & Transparency