thanz Member Joined Apr 6, 2005 Messages 23 Location Texas Format 35mm RF Feb 21, 2007 #1 anyone have a good dev time to start with for this combo for tray development (Acros 4x5 in Rodinal) Film was rated at 100. Thanks. Todd Last edited by a moderator: Feb 21, 2007
anyone have a good dev time to start with for this combo for tray development (Acros 4x5 in Rodinal) Film was rated at 100. Thanks. Todd
OP OP thanz Member Joined Apr 6, 2005 Messages 23 Location Texas Format 35mm RF Feb 21, 2007 #2 ...bueller.................bueller?
coriana6jp Member Joined Apr 13, 2005 Messages 810 Location Japan Format Med Format Digital Feb 21, 2007 #3 Try semistand 1:150 for 90 minutes, some of my best negatives have been developed using that combination with Acros. Hope it helps. Gary
Try semistand 1:150 for 90 minutes, some of my best negatives have been developed using that combination with Acros. Hope it helps. Gary
Lee L Member Joined Nov 17, 2004 Messages 3,281 Format Multi Format Feb 21, 2007 #4 I just did a search of APUG on Acros and Rodinal that returned a five page list of threads. I'm sure there are a number of good suggestions in those results, at least one of which would suit your preferences for dilution and other parameters. Lee
I just did a search of APUG on Acros and Rodinal that returned a five page list of threads. I'm sure there are a number of good suggestions in those results, at least one of which would suit your preferences for dilution and other parameters. Lee
OP OP thanz Member Joined Apr 6, 2005 Messages 23 Location Texas Format 35mm RF Feb 21, 2007 #5 thanks Lee...no luck though. Todd
kjsphoto Subscriber Joined Apr 21, 2004 Messages 1,320 Format Sub 35mm Feb 22, 2007 #6 Acros rated at 32 Rodinal 1:50 20C 6 min 45 sec In a jobo with a 5 minute pre rinse and a water stop bath. As far as shooting it at 100 I have no idea as when using a densitometer rated at 100 it is way off.
Acros rated at 32 Rodinal 1:50 20C 6 min 45 sec In a jobo with a 5 minute pre rinse and a water stop bath. As far as shooting it at 100 I have no idea as when using a densitometer rated at 100 it is way off.
P C Headland Subscriber Joined Mar 24, 2005 Messages 826 Location New Zealand Format Multi Format Feb 22, 2007 #7 Not in a tray, but with reduced agitation, so may be a useful starting point: EI100, 1+100 for 18 minutes
Not in a tray, but with reduced agitation, so may be a useful starting point: EI100, 1+100 for 18 minutes
OP OP thanz Member Joined Apr 6, 2005 Messages 23 Location Texas Format 35mm RF Feb 22, 2007 #8 thanks much! Todd