90mm enlarger lens for my beseler 23c

[rowghani]

searching on ebay. will all of them fit a beseler 23c lens board or should I be looking for a specific size?

also anybody know anything about this lens?

http://www.ebay.ca/itm/Fujinon-ES-9...183079?hash=item1a0a6ecc27:g:n94AAOSwgkRVTCPY

thanks in advance.

 

[Rick A]

I think it's a standard 39 mm LTM . If not, Beseler lensboards are easy to get or make yourself, just drill the appropriate hole.

 

[Nige]

I have a 90 EX Fujinon that is excellent even though I generally use a 80mm Componon mainly for the 'ease of use' features, so agree with OnF, keep an eye out for a fujinon

 

[Old-N-Feeble]

Ignore post #3 the MC version is the EX and single coated is the EP. The ES was their budget line, not as good as the other two.

 

[John Koehrer]

Most recent lenses use the more or less common 39mm thread size.

Some older Schneiders used 25mm & other less common(today) makes seemed
to pull numbers out of the air.

 

[mgb74]

Most likely 39mm as others have said. I've seen some older 80mm in 32 or 25mm, but never anything as long as a 90. FYI, the lensboards for the Beseler 23 and 45 are the same.

 

[ic-racer]

I don't have the Fujinon brochure for the ES, but the EX brochure shows 50,75 and 90mm lenses in 39mm (26"pitch; Leica) mount while the 135mm is shown in 53mm (0.75mm pitch) mount.