Hello!
Could anyone share the dimensions of the dark slide for the Bronica ETR/ETRs film back? I have two cameras and none of them has the dark slide. It seems that the market has gone a bit crazy and sellers ask the price of a camera just for a film back... So, i thought I could order them at the hardware workshop.
Will be very thankful if someone can post the dimensions here including thickness and position of the hole.
I can let you know later , unable to at the moment as I'm at work .
There is a lug on it as will that has to be inserted before the back can be removed for a different one .
Have you checked the price of 220 backs lately ?
These often sell possibly for the same or less than to have one made .
Buy one of them , keep the dark slide and stick the back back on eBay as incomplete . Might work out that it'll cost you nothing this way .
I have a spare ETR shell and darkslide (two, actually) that I could sell you. That _has_ to be less expensive/less involved than having a machine shop fabricate one for you that has the interlock tabs in the right place.
Send me a PM if you're interested.
Thanks for your responses!
I realized, just as you guys say, there is a small interlocking tab on the bottom of the shell, which must be depressed to release the film back. It seems to be a bit more complicated than i thought (i actually never had a bronica dark slide in my hands).
Seems buying the film back is the only real option