Zenit PhotoSnaiper

megzie

Member
Joined
Apr 20, 2008
Messages
3
Format
Medium Format
I was so excited the day my Zenit PhotoSnaiper came in the mail, that I couldn't even talk. But then disappointment set in when I realised that the entire users manual is in Russian (which I should have guessed, since it was /imported from Russia/).

Whatever, I'm not saying I'm not an idiot. Actually, it's because I'm an idiot that I'm here.

I can't figure out how to get my lens (Tair-3S) off. Yes, go ahead, laugh.

I know there's a pin that's supposed to be realeased, but I have no idea what to hit to release it...

And I've read about five different Zenit 122s and 122 manuals. I'm stuck. Halp?

Danke

EDIT//
It appears that the only way to remove the lens is by sheer brute force, and I have succeeded! But my thighs are killing me now... Don't ask.
-M
 
Last edited by a moderator:

Anscojohn

Subscriber
Joined
Dec 31, 2006
Messages
2,704
Format
Medium Format
No, there is no pin. At least not on my old one, which is about twenty years old. But that fella is really on tight. Undo the rifle stock, of course. Then you are going to have to unscrew the lens by putting a pair of big, well padded adjustable grip pipe pliers on the lens mount--not the lens barrel--it to get it started.
Once that is done, it is a snap and you should have no further trouble, although a little WD-40 on the end of your finger and applied to the mount certainly can't hurt. BTW, although the whole thing is a heavy, inconvenient clunker, it is built like a Stalin tank and the lens (which is easy to focus once you get the hang of it) is very sharp.

Let me know if you need additional info. Email at JayKhill@aol.com
 

aparat

Member
Joined
Sep 5, 2007
Messages
1,177
Location
Saint Paul,
Format
35mm
I used to have this lens. That was many years ago, so I can't remember much. However, if you scan the manual to PDF and post it on the web (or email it to me), I can try to help you translate the relevant parts.
aparat
 
OP
OP

megzie

Member
Joined
Apr 20, 2008
Messages
3
Format
Medium Format

Thanks! I got it! But instead of pliers, which would have been the easy way, I braced the camera with my thighs... Stupid, I know. The pain... :[

But seriously, thanks a lot :]
 
OP
OP

megzie

Member
Joined
Apr 20, 2008
Messages
3
Format
Medium Format
I used to have this lens. That was many years ago, so I can't remember much. However, if you scan the manual to PDF and post it on the web (or email it to me), I can try to help you translate the relevant parts.
aparat

Thanks so much for the offer, but I finally got it! Yay!

If I run into any more problems, I might hit you up on the translation help :]

Thanks again!
 

weasel

Member
Joined
Nov 25, 2006
Messages
171
Format
Medium Format
I have one, and I think the barrel of the lens is made from left over cast iron sewer pipe.It could probably be turned into a mortar of some sort, if one were so inclined.
 

Anscojohn

Subscriber
Joined
Dec 31, 2006
Messages
2,704
Format
Medium Format
 

srs5694

Member
Joined
May 18, 2005
Messages
2,718
Location
Woonsocket,
Format
35mm
FWIW, you might be interested in the Yahoo Dead Link Removed Compared to APUG, it's low volume (typically one or two dozen messages a day). It includes a files area with manuals, battery information, etc.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…