Want to Buy WTB/WTT: for lens boards

[jcc]

Hi all,

If anyone has a Linhof Technika style lens board (96x99mm) with a Copal #1 hole (42mm) that they are looking to offload, I'm looking for one.
Also, if you have a lens board with an 80mm hole in it, in a Graphic/Sinar/Technika lens boards (either three will do).
It's for a fun little project, so I don't need them pristine—janky is fine, as long as they're just light tight.

Thanks in advance!
Jefferson

 

[darinwc]

i have a Sinar board with a 70mm hole.

 

[jcc]

I don't have a way (or know anyone near me who has a drill press) to make a 80mm hole.

 

[binglebugbob]

A local machine shop can usually bore a hole for $10 to $20 depending on the shop.

 

[B.S.Kumar]

I have Technika type lensboards here:
(there was a url link here which no longer exists)

and a Toyo field board with an 80mm hole here:
(there was a url link here which no longer exists)

Thanks,
Kumar

 

[Newt_on_Swings]

You can cut a rough lens board with a dremel and sand it smooth. Just mark out the correct diameter for the shutter and you can drill holes inside your marked circle and then cut it out.

 

[r-brian]

I have a Copal #1 board (Horseman). I also have some blank square boards about the size of the Technika/Horseman board that I can throw in with it. You can see if will work. Send me a PM and we can come up with a good price.

Edit: I just realized I have a 4 inch square wooden board with a 80mm hole.

 

[jcc]

Thanks, folks! I'm good with the second lens board (the one with an 80mm hole), and the Technika Copal #1 is pending.