Want to Buy WTB Paterson Super System 4 tank(s)

[AndyB.]

I'm looking for a Paterson tank or two to use for the "taco method" of developing 4x5 film.

Apparently I need the "universal" short tank that accepts 35, 120 and 126 film.

I don't necessarily need the reel, but I do need the spindle that makes the whole unit light-tight.

Thanks!

-- Andy

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[BradS]

There's nothing magical about the Paterson tank....any tank that is "big enough" (ie taller inside than 4 inches) and light tight will work. Most (all?) tanks that are designed to process two rolls of 35mm at once will work.

 

[AndyB.]

I've heard that, but my experiment with a Nikkor 2-reel tank didn't work so well -- the 4 "tacos" shifted/slipped in the hairbands during agitation and the film corners scratched the emulsion.

My hope is that the Paterson central post will hold the tacos in position better.

This was with Freestyle's Arista 100, which I think is Foma? Maybe it's just a really soft emulsion, but ...

-- Andy

 

[JohnC]

Andy,
If your film is moving in the tank, it's an indication your agitation is too violent. Film should be stirred not shaken( as James Bond specified for his martini). When you agitate, the objective is simply to move away the small quantity of developer that's been in contact with the film for the previous 30 or 60 seconds, to replace with fresh stuff. Handle that tank as if it were a breast - not a cocktail shaker.

 

[AndyB.]

Wait right there while I go find someone to practice with ...

I think too that the volume of developer has a lot of leverage, for lack of a better term, over these four relatively large sheets of film that aren't very well secured in this method.

 

[nsurit]

This is what I do. You need to be careful not to agitate too much. Watch the video. Dead Link Removed

Bill Barber

 

[AndyB.]

I'd seen that gadget, and it looks very useful. Particularly as it would hold a whole magazine's worth from a Grafmatic.

But I'll tread this path a bit farther to see where it leads.

Thanks, all!

-- Andy