Want to Buy WTB: Omega D2/D-II flat lens boards (2)

Trader history for ignatiu5 (2)

Status
Not open for further replies.

ignatiu5

Subscriber
Joined
Feb 16, 2007
Messages
334
Location
Philadelphia, USA
Format
Medium Format
I finally started to set up my Omega D-II enlarger only to find that the lens cones that the seller labeled for 35mm and MF aren't the ones I need.
I'm looking for one or two flat lensboards (I believe the original part number was 421-100), and while I can get them from eBay if needed, I thought I would check here first to see if someone might have a spare or two.

Please PM me and let me know what you have.
 
Last edited by a moderator:
OP
OP

ignatiu5

Subscriber
Joined
Feb 16, 2007
Messages
334
Location
Philadelphia, USA
Format
Medium Format
Bump for the weekend.

It looks like I've got one flat lensboard on the way via a trade, looking to add one more if possible to mount each of my 50mm and 80mm lenses.

Please PM me and let me know what you have.
 

BradS

Member
Joined
Sep 28, 2004
Messages
8,124
Location
Soulsbyville, California
Format
35mm
Just to clarify, you want the thing that fits where the cones do...essentially, a flat cone - right? Not the round lens board that mounts to the cone - is that correct? Or do you want / need both?


EDIT: just remembered that I gave away my Omega D2 and a bunch of parts so, not sure I have either of these anymore but, I can look when I'm home this weekend.
 
OP
OP

ignatiu5

Subscriber
Joined
Feb 16, 2007
Messages
334
Location
Philadelphia, USA
Format
Medium Format

Ideally, I need the flat lens cone, the lens mount disc (with a hole for 39mm lenses) and the filter holder bracket. I can cannibalize either of the latter two items from my current cones, but if possible I'd like to leave those intact, just in case I decide I want to try 4x5.
 

BradS

Member
Joined
Sep 28, 2004
Messages
8,124
Location
Soulsbyville, California
Format
35mm
Ack! Sorry, I spaced out on you. I have a flat lens cone with a lens board attached. The lensboard has a 40mm hole in it. I have filter holder bracket too but it is just the loose bracket - no filter holder and no screws. I do not have any of the proper thumb screws that attach the lens board to the cone but, will include standard machine screws. You'll have to supply screws for the filter holder thingy.

Does $25 + $7.5 for shipping sound fair? please send you a pm and we con work out payment details. I prefer paypal but other methods of payment are ok too.
 
OP
OP

ignatiu5

Subscriber
Joined
Feb 16, 2007
Messages
334
Location
Philadelphia, USA
Format
Medium Format
Bump.

I have one of these thanks to a successful trade with another APUGer, looking for one more to get both 50mm and 80mm lenses mounted.

Please PM me and let me know what you have.
 
Status
Not open for further replies.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…