Want to Buy WTB--Linhof 2x3 Technika/Tech 70 lensboard Copal #0

[David A. Goldfarb]

Looking for a Linhof modern style (not the earlier silver Technika III style) Copal #0 lensboard for the Tech 23/Tech 70/Wideangle Focusing Device.

 

[werra]

Something like this? Ruler units are centimeters.

 

[David A. Goldfarb]

Yes that should work, but let's wait a bit and see if there isn't one a little closer to New York. Meanwhile, you can PM me and let me know how much you want for it, and if you can take PayPal. If it involves an international bank transfer, it's not worth the fee at this end.

 

[David A. Goldfarb]

I think I'm mistaken. This is for a 00 shutter, not a 0 shutter, so I don't think it will work. Even if I were to drill out the board, the shutter will likely not fit in the recess. But thanks again for posting.

If someone is interested in the 47/8 Super-Angulon I'm selling and needs a Tech 23 lensboard for it, that would be perfect, because it's in a 00 shutter.

A Copal/Compur #0 lensboard should have a hole that is 36.4mm, which is the one I need.

 

[gordrob]

Hi David
Are you looking for a recessed or flat lens board and does it matter if it has the cable release holder on it?
I have a new flat Technica 2x3 lens board with the cable release holder with the 36mm hole

Regards
Gord

 

[David A. Goldfarb]

Gord, that's fine. I'd prefer a flat board without the cable release holder, because I don't use that system, but it's easy enough to remove the cable release socket, if no one has one without. In any case, send me a PM and let me know how much you would like for it.

 

[David A. Goldfarb]

Okay, looks like I'm set.