Want to Buy WTB 4X5 Wisner bag bellows

I need a bag bellows for my Wisner 4x5 pocket expedition, I am pretty sure it take=s the same size bellows as the regular camera.
Please let me know what the actual dimensions of the frame in yours is, as well as what you are asking for it.
Thanks
Gaston

bump

I have a set that are-
Rear frame 7 3/8" square, front 4 1/2" square.
They extend to 6 1/2"
I paid $115 for them last year and would sell for same.

Thank you, I am away from home till am tomorrow and will do the measurements, my is a pocket expedition so it might be different.
Best to be certain.
Will let you know soon.
Gaston

I measured the outside dimensions and got a somewhat different size than your measurements.
In inches, with a ruler, I got 6 9/16 on the rear and 4 7/16 on the front
Then, with a caliper, mine is in mm, I got 167.5 on the rear and 114 on the front.Perfect square.
I think it is going to be ok but one of us made a mistake.
Could you please repeat your measurements?
The back seems to be off. If you have calipers, that would be great.

Hi Gaston,
With a caliper the back frame is 188mm so apparently a little too big as you suspected.
The front is 114mm as expected.
Good luck in your search,
Rory

Thanks, It is not going to be easy!