Woo Hoo! 8x10 tray dev/No Scratches

Jekyll driftwood

H
Jekyll driftwood

  • 0
  • 0
  • 11
It's also a verb.

D
It's also a verb.

  • 2
  • 0
  • 23
The Kildare Track

A
The Kildare Track

  • 11
  • 4
  • 108
Stranger Things.

A
Stranger Things.

  • 1
  • 2
  • 74

Recent Classifieds

Forum statistics

Threads
198,914
Messages
2,783,017
Members
99,745
Latest member
Javier Tello
Recent bookmarks
0

Alan9940

Member
Joined
Jun 17, 2006
Messages
2,425
Location
Arizona
Format
Multi Format
Hello GB,

Congrats on your success with 8x10 development. Before I had a Jobo, I developed all my LF film in trays and rarely had a scratch. Evenness of development was sometimes an issue, but that's another story. Also, unlike Scott I always used a tray size one size larger than the film; 8x10 tray for 4x5, 11x14 tray for 8x10. If you run a length of square plexi under the far end of the trays (if I remember correctly mine was about 1/2" square), the films will not "drift" in the tray; it's not effort to keep the films "cornered".

Just a couple of other things to think about as you gain more experience with LF film.

Good luck!
 

photomc

Member
Joined
Jul 20, 2003
Messages
3,575
Location
Texas
Format
Multi Format
Congratulations GB, sounds like there will be some contact prints coming real soon.
 

mjs

Member
Joined
Mar 15, 2005
Messages
1,123
Location
Elkhart, Ind
Format
Multi Format
Ain't them big negatives purty! :smile: Wait 'till you print them...

Mike
 

palewin

Member
Joined
Nov 23, 2006
Messages
146
Location
New Jersey
Format
4x5 Format
Congratulations on you "tray success." Some thoughts which might help with 4x5s (I'm just in the process of developing 50+ negs from a vacation trip, about 7 runs of 8 negs each...). First, tilt the trays towards you by placing some scrap wood at the far ends - that way any negs which get away float towards you, and more importantly, it keeps the liquid at the working end deeper, which minimizes scratches. I would suggest "googling" for Ken Lee's website, which has a bunch of tray processing suggestions. The one I picked up from him is using plastic food storage containers, roughly 6x8, from the supermarket, instead of trays. They are deeper than trays (again, the depth of liquid minimizes the potential for scratching, since it keeps the shuffled neg further from the others when you put it back in the chemicals) and has less surface area (which reduces oxidation on rapidly-oxidizing developers like the PMK I use). And, since I keep stressing depth of liquid, don't be stingy with the amount of developer and fixer. I use 2 liters for each run (PMK is very dilute, so 2 liters is inexpensive, and I re-use the fixer based on the manufacturer's capacity numbers in square inches; the pre-soak and stop bath are both water, so they're free.)
 
OP
OP
gbenaim

gbenaim

Member
Joined
Nov 3, 2004
Messages
441
Format
8x10 Format
Well, my celebrations were a little premature. No scratches, but the edges on a couple are extra dense. I don't know whether it's from the development or bellows flare, maybe someone knows how to tell the difference. I don't have a scanner, otherwise I'd post examples. The bottom and left edges on a couple of images are denser, and they were longish exposures in full sun, though I did shade the lens throughout w the darkslide. I'll see how it goes next time. If it is from the processing, is it just a metter of keeping the negs in the center of the tray all the time, so as to avoid increased agitation next to the walls of the tray (I turned 180 degrees a couple of times)? What else can cause this? Thanks,

GB
 

GeorgesGiralt

Member
Joined
Sep 16, 2004
Messages
523
Location
Toulouse, Fr
Format
Large Format
Well, my celebrations were a little premature. No scratches, but the edges on a couple are extra dense.
...........................................................................
What else can cause this? Thanks,
GB
Hi, for one, will bet on a leaky film holder.
Try to load it with a sheet of B&W paper and let it sit for a couple of minutes under a desk lamp, then process the sheet and you'll see...
I had a Grafmatic with the foam at the bottom leaking light, and all my 6 negs were denser around the septum edge were the opening is. Of course, the first and second sheet were the worst....
Hope this helps !
 

GeorgesGiralt

Member
Joined
Sep 16, 2004
Messages
523
Location
Toulouse, Fr
Format
Large Format
Strange,
On one post you said :
"Well, my celebrations were a little premature. No scratches, but the edges on a couple are extra dense."
and reply to my post with :
"Well, the edges are clear, so I ruled out a leak for that reason."
So I'm confused ;-)
Are your negatives thinner or denser ?
If they are denser it is probably a light leak, if they are thinner, maybe some sort of vigneting. Did you use movements ? Did you check that the lens iris was totally uncovered by looking at the clipped corners of the ground glass ?
Has your lens enough coverage ? Is your bellow too soft and lagging too much ? Do you have something getting loose into the bellow when you insert the DDS ?
And last but not least (I've done this often.....) did you insert the film holder fully home ?
 
OP
OP
gbenaim

gbenaim

Member
Joined
Nov 3, 2004
Messages
441
Format
8x10 Format
George, I should have been clearer. The edges of the image area are denser than the rest of the image, but the unexposed edges of the neg (i.e. the parts covered by the guides and flap) are perfectly clear. Usually, when I've seen light leaks, they affect the usually clear areas. Hope that clears it up.
 
OP
OP
gbenaim

gbenaim

Member
Joined
Nov 3, 2004
Messages
441
Format
8x10 Format
Scott, I thought it was the other way around. Why would developing affect the unexposed areas? Conversely, if there's a leak that exposes the usually clear areas, what would the method of developing have to do with it? I did print them, btw, that's when I actually noticed it.
 

TheFlyingCamera

Membership Council
Advertiser
Joined
May 24, 2005
Messages
11,546
Location
Washington DC
Format
Multi Format
developing would affect the entire piece of film, if you are tray processing, since there is nothing to mask the edge. If there is a light leak, unless the leak is in the film holder structure itself, the margins are well-shielded by the film holder. I don't have a scan of an image I processed with stainless-steel hangers in a tank once, but I overagitated, and as a result, I had these marks on the negative from over-development where the developer surged through the holes in the hanger. You can see it even into the masked edge of the film.

Sounds like we need to see your contact sheets to properly diagnose this issue. If the clear area is consistently clear the whole way through, it's more likely a light leak in the holder, unless the light leak is profound, which it sounds like if it is a light leak, this was not.

It could be the developer though, because in the development process, even though the edge did not receive exposure, the unexposed silver is still present in the film, and over-vigorous agitation or other development process issues can cause image forming silver to deposit in the margins.
 
OP
OP
gbenaim

gbenaim

Member
Joined
Nov 3, 2004
Messages
441
Format
8x10 Format
Well, I spent all afternoon yesterday testing the camera for leaks, and found the bellows is full of pinholes along the seams. I'm in touch w the store I bought it from, they'll either try to find me a new bellows or refund most of the money. The pinholes closer to the back were probably causing the most damage, but the whole things leaking light. Oh well, that's ebay for you, even if you explicitly ask someone to check a camera, they'll send it without checking and let you deal w it. Thanks everyone for their help.

GB
 

Joe VanCleave

Member
Joined
Jan 20, 2004
Messages
677
Location
Albuquerque,
Format
Pinhole
I've experienced dense edges when developing 4x5 in small trays, and I'm convinced the problem happens due to inconsistent agitation; the edges are getting localized agitation at a higher rate (by 'curl-over' of chems from bottom to top, or perhaps waves bouncing off the sidewalls?) than is the middle of the film. I've solved this problem by using larger sized trays, so that the entire emulsion surface gets agitated more evenly.

It's a tradeoff between increased cost of chemistry verses ruining the negatives - which turns out not to be a tradeoff at all!
 

mark

Member
Joined
Nov 13, 2003
Messages
5,703
Just wanted to share the joy, just deved my first 8x10s in trays, scratch free! I had tried it w 4x5s and failed every time, so was pretty concerned about 8x10s, but it turned out just fine. It's easier to handle than the smaller film, it turns out. Anyway,

GB


I hate you.:mad: :D

My scratches show up in the fix.
 

TheFlyingCamera

Membership Council
Advertiser
Joined
May 24, 2005
Messages
11,546
Location
Washington DC
Format
Multi Format
try re-blacking the inside of your bellows. They may be faded enough that they're reflecting light back onto the film. Also check the light seal where the back meets the rear standard. There may be some light slipping in there. You're shooting a Calumet C1, correct? If that's so, probably about the best you can do is re-paint the mating surface.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom