where to get started?

Ishotharold

Member
Joined
May 21, 2006
Messages
51
Location
North Park,
Format
Medium Format
I just received a big box of cameras, among all the kodak autographs and roll camera I managed to find something that really got me excited. It's a conley 5x7 and it has what I think are two plate holders. They have a little tab inside that holder that presses down and is spring laoded. Sound right? Here is a picture of the camera. The bellows don't have any glareing holes and the shutter works well so my next thought is of course 'I want to make pictures with it'. Where do I start?

 

reellis67

Subscriber
Joined
Mar 10, 2005
Messages
1,885
Location
Central Flor
Format
4x5 Format
If your plate holders have film inserts (thin, black metal 'plates' with narrow channels on three sides to hold film) you can start right away. If not, you'll need to pick up at least one 5x7 film holder. I don't have a picture of one on hand, but they fit in by depressing the spring loaded tabs at the bottom on the holder.

- Randy
 

TheFlyingCamera

Membership Council
Advertiser
Joined
May 24, 2005
Messages
11,546
Location
Washington DC
Format
Multi Format
Those are glass plate holders. You can use them for film, but it's a bit tricky. Your best bet is to look around for some old wooden 5x7 film holders which you can pick up fairly cheaply on The-Auction-Site-Who-Must-Not-Be-Named. Once you have a handful in your posession, go out and shoot!
 
OP
OP

Ishotharold

Member
Joined
May 21, 2006
Messages
51
Location
North Park,
Format
Medium Format
two hold plates and two have the film inserts. I have some efke 5x7 sheets but I was more curious about how to get started in plate photography. I'm guessing I need to coat my own?
 

reellis67

Subscriber
Joined
Mar 10, 2005
Messages
1,885
Location
Central Flor
Format
4x5 Format
Check around this site for older threads on plates - there are a number of them. I don't have any experience with them myself, other than printing vintage plates (which I collect).

- Randy
 

Jerevan

Member
Joined
Nov 19, 2004
Messages
2,258
Location
Germany/Sweden
Format
Large Format
Ishotharold said:
two hold plates and two have the film inserts. I have some efke 5x7 sheets but I was more curious about how to get started in plate photography. I'm guessing I need to coat my own?
Click to expand...

Yes, if you want to make plates, I think you'll have to coat your own. There is ready-made glass plates on the market too, but they are very expensive.

Here's one explanation on how to do dry plates:
AlternativePhotography.com : the dry plate or liquid emulsion process

By the way, I have a Conley lens, which probably came off a camera like yours.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…