Where did all the Koachrome processing machines go.

kb3lms

Member
Joined
Jun 24, 2006
Messages
1,004
Location
Reading, PA
Format
35mm
Lot's of valuable stainless in those machines, I would think. Scrap metal would be your best bet!
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
Whole film plants went the way of scrap metal. Why would just a processing machine be spared from that fate?

By the way, on the Kodachrome enthusiasts site, one K-lab processor was stated to be saved for refurbishing and use a few years ago. Nothing had been heard of that project again.
 
OP
OP

Marvin

Member
Joined
Nov 11, 2009
Messages
404
Location
Williamston, NC
Format
Multi Format
Wonder if Dwaynes still has theirs since they were the last to process Kodachrome?
 

railwayman3

Member
Joined
Apr 5, 2008
Messages
2,816
Format
35mm
The K=lab on the Kodachrome site was rescued from a scrapyard where it had been standing outside in the weather. There were some photos posted at one time and it looked in a very sorry state. As AgX says, nothing has been heard of the project for maybe a couple of years, despite requests for updates being made on the forum by interested members.
It seems that Dwaynes machine may well have been scrapped (I read somewhere that they'd offered it for preservation without success?)
 

Ronald Moravec

Member
Joined
Jan 17, 2005
Messages
1,355
Location
Downers Grov
Went the way of buggy whips and candles and film scanners. K chrome had its charm. I just wish there was a way to get a decent print from it. I tried masking and inter negs without success. I bet it could be scanned and tamed to look good.
 

PKM-25

Member
Joined
Nov 25, 2004
Messages
1,980
Location
Enroute
Format
Multi Format
The K-Lab was rescued from the scrap yard is in decent shape and now has all the needed accessories to run film minus a chiller which can be had via a third party or fabricated. This includes the manuals, spooler, computer, chemistry racks, etc. some of the tubing might have to be replaced but that is very easy to come by. Kevin has been working away in trying to get things together in preparation of creating the soup wich is a slightly different method than a regular K-14 line.

We talked on the phone tonight for over an hour, this is the best bet to get a Kodachrome line running again, in my opinion...
 

Tom1956

Member
Joined
May 6, 2013
Messages
1,989
Location
US
Format
Large Format
You mean to tell me is these few short years there are fewer Kodachrome machines remaining in the world than B-17's?
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
52,139
Location
Delta, BC Canada
Format
Medium Format
Tom1956 said:
You mean to tell me is these few short years there are fewer Kodachrome machines remaining in the world than B-17's?
Click to expand...

The full size Kodachrome K12 and K14 machines were very large - a single batch of pre-spliced film plus leader plus trailer was usually several miles long.

Not the sort of thing you might find in someone's storage unit.

The K14 "minilabs" were smaller, but not small: http://tinyurl.com/nckd5dz
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
Here you see quite a bit of the full-size machinery:

(there was a url link here which no longer exists)
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
52,139
Location
Delta, BC Canada
Format
Medium Format

lxdude

Member
Joined
Apr 8, 2009
Messages
7,094
Location
Redlands, So
Format
Multi Format

mopar_guy

Member
Joined
Sep 12, 2009
Messages
1,173
Location
Washington,
Format
Multi Format
Not something you could put in the back of a pick-up truck and haul home to your garage
 

removed-user-1

From the late 80's through the mid 90s, my father worked as a service rep for a micrographics film processor manufacturer (not Kodak). One of their accounts closed an office, and the service techs were called out to remove the leased (and very expensive) equipment from the premises. These machines were perhaps several years old at the time. So, they rented a dumpster and pushed, heaved, and threw all the equipment into it, to be sold as scrap. I imagine the Kodachrome processors met this fate, and that the same fate awaits most minilab equipment still in use now.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…