What's wrong - film

[malcao]

I had this problem once before but then I thought it was the Paterson Orbital and that the sheet wasn't exposed to the developer beacuse of other sheet. But this time I used a Jobo drum so the problem must be something else.
If it was a light leak from the film holder it shouldn't be ok at the edge.
All help appreciated.

see link!

http://gallery.me.com/ifotograf#100059/scan00011&bgcolor=black

PS. All other 5 sheets in the same development was ok.

 

[Ian Grant]

That's been fogged to light somewhere or other, It's not a specific developer issue. Looks like it's happened while in the dark-slide (film holder) as it doesn't run across the top edge but just bleeds into it.

Ian

 

[trexx]

Light leak in the camera. The left edge is OK because it is shadowed but then there is a flare from the left that hits the film. This is likely from the holder not seating properly.

Place a holder in the camera and remove the lens. Put the camera in the sun and look from the lens holder at the film holder inside the bellows.

TR

 

[malcao]

Thanks, film holder not seating properly make sense. I have a Linhof TK 45, I have to be more carefull the next time at least there is no leaks from the bellow since the other photos are ok.