all of the time now I have the multiple exposure tabs on the side of my mirror, however the multiple exposure lever is not set to multiple exposure, yet the tabs on the side are there. Also the other switch is set to N and I'm still having the same thing appear.
I also don't understand how when I put a back on the camera it still works fine, just with the little tabs appearing, and the multiple exposure works as well.
Check the multiple exposure lever is actually turning the spindle it is attached to. I had a similar problem a couple of months ago. On examination I noticed a hairline crack in the plastic of the lever which was enough to loosen it and stop it turning the spindle. A little super glue used extremely carefully and it was fixed. Of course that lever can now not be removed from the camera, but at least I got the functionality back. (If this is what is happening with your camera, make sure spindle and lever are properly aligned before going mad with the glue!)
These are what the little tab things look like
Look at the mirror and see those black tabs next to it, those
Hope someone can help
Only the sq-ai has the indicator in the view screen for multi-exposure.
Anyone has a tip on how to remove the lever if replacing it?
Mine is cracked and won't rotate the spindle. The gap in the crack is just getting bigger as i push the lever forward to multiple exposure mode. So I'm figuring that the spindle has an oval shape at the connection to the lever?
I'm quite inexperienced so it would be really nice to know if there's a chance to replace the lever by yourself if able to find a spare one.
(EDIT: SQ-Ai model, if that makes any difference)
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?