like most days, a 12 exposure roll of delta 100 in d76 1+1, exposed in a Leica IIIg and collapsible summicron.
what was the last camera you used, last film and how was it developed
-
A
- Thread starter removed account4
- Start date
Recent Classifieds
-
Sold Graflex 8X10 Focal Plane Shutter
- Started by 2Dogs
-
For Sale FS: Toyo Blue Lettering 4x5 Film Holders - 10 nos.
- Started by B.S.Kumar
-
For Sale Zeiss Super Ikonta IV (534/16), 6x6 Tessar, rangefinder folder $325
- Started by Dan Daniel
-
For Sale Fuji Fujica GM670 with 100mm f3.5 lens 6x7 Medium Format
- Started by Oldwino
Forum statistics
OM-2n + Zuiko 28mm f/3.5, APX 100 (64), Rodinal 1+50, 30s agitation at every 5th minute for 15 mins. Yet to make contact sheets...
Now I am using the Adox C-Tec Kit C-41. Works good and easy.
Rollei 35 T
Kodak Gold 200
Adox C-Tec Kit C-41, 38°C
Plustek Opticfilm 7300, Vuescan
Rollei 35 T
Kodak Gold 200
Adox C-Tec Kit C-41, 38°C
Plustek Opticfilm 7300, Vuescan
like most days, a 12 exposure roll of delta 100 in d76 1+1, exposed in a Leica IIIg and collapsible summicron.
You nailed that. Well seen and well executed.
Thank you!
I can’t help but try different and unconventional developers, especially paper developers for sheet film.
Crown graphic, 150 5.6, hp5 at 250, developed in Adox Neutol eco 1+19 20c dip and dunk. One sheet for 5:15 and one at 7:00.
The sheet for 7:00 mins is looking like it might print good at grade 3. When I get to printing, I will see how I need to develop next time. Probably a little more time tho, I like to print at grade 2 under a diffusion enlarger.
Crown graphic, 150 5.6, hp5 at 250, developed in Adox Neutol eco 1+19 20c dip and dunk. One sheet for 5:15 and one at 7:00.
The sheet for 7:00 mins is looking like it might print good at grade 3. When I get to printing, I will see how I need to develop next time. Probably a little more time tho, I like to print at grade 2 under a diffusion enlarger.
like most days, a 12 exposure roll of delta 100 in d76 1+1, exposed in a Leica IIIg and collapsible summicron.
Love this. Must be an annex to the mint!
Yep, sounds like Adox adopted the Tetenal formulas, I have had great results with Tetenal E6, I am going to be trying the Adox chemistry for E6 soon.
Great results!
OM-1n + 28mm f/3.5. Exposed two rolls of APX 100 some years ago and I did not even refrigerate them. Today, developed it with Rodinal 1+50 for 17 mins. 10 inversions at the start and 3 inversions at every 5th minute. Its a minimal stand, perhaps giving a gentle shoulder...
There are few more rolls to go in 120 and then I promise myself to do the contact sheets.
There are few more rolls to go in 120 and then I promise myself to do the contact sheets.
Thank you. Yes, Adox made clones of the unavailable Tetenal Kits.
As soon as I will be finished with the C-41 Kit I will give E-6 a try. I still have some Fuji slide films in the freezer. Slide film rocks! Especially in 120.
Leica M5, Fomapan 200, Pyro 510 1:500 45min EMA - 90 sec initial agitation and 10min agitation intervals thereafter.
Wanted to see how a Pyrogallol based developer handles long, low agitation development because PMK cannot do it due to rapid aerial oxidation.
The negatives look a bit low contrast but I have to print or scan to really see how they came out and whether it's worth the effort.
Wanted to see how a Pyrogallol based developer handles long, low agitation development because PMK cannot do it due to rapid aerial oxidation.
The negatives look a bit low contrast but I have to print or scan to really see how they came out and whether it's worth the effort.
Last edited:
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |