What do I do with a Kodak Monitor?

semi-ambivalent

Member
Joined
Mar 26, 2011
Messages
733
Format
35mm
I just learned my brother is sending me our father's Kodak Monitor, apparently pristine and complete with box, instructions and sales receipt. A quick google implies 'Where do I even get film for this?' Well, can I even get film for this?

thanks,
s-a
 

Whiteymorange

Subscriber
Joined
Jul 27, 2004
Messages
2,387
Location
Southeastern CT
Format
Multi Format
I came across a Monitor a while ago and have come to like it quite a bit. Re-spooling 120 onto 620 reels is easy and quick. Google it here or on the wider web. I found a Kodak range-finder that I use in the cold shoe of the camera to help in focusing. The whole rig is a tad ungainly, but there is a characteristic look to the images taken with tessar design lenses from that era, and I like it. The special anastigmat lens became the Ektar. The camera is fun, and very well built. Go shoot some film!
 

smithdoor

Member
Joined
Nov 2, 2013
Messages
134
Location
Clovis CA
Format
4x5 Format
Yes you are right it is a lot cheeper to buy 120 and re-spool @ http://www.freestylephoto.biz/190220-Arista-EDU-Ultra-200-ISO-120-size for less than $3.00 and re-spool. The cost of new Kodak is 620 film is $14.00 each. By buying Kodak film one time you have a spool to re-spool or good luck on ebay pricing. If I had a 620 size camera I too would re-spool. I only post this for any one that does not like usnig the darkroom or using a bag

I did find one place for $7.15 per roll no nothing of them
http://www.bluemooncamera.com/inventory.php?menuID=4&catID=500&deptID=557

Dave


Ian Grant said:
Which is re-spooled 120 at a much higher price.

Ian
Click to expand...
 
Last edited by a moderator:

Denverdad

Member
Joined
Apr 20, 2009
Messages
316
Location
Superior, Co
Format
Medium Format
Congratulations on the monitor! Do you know which model it is yet? I only ask because in addition to the Six-20 that people have been talking about Kodak also produced a Six-16 version of the monitor. Rather than 620 film, that one requires the larger 616 format which is no longer made, so it would make the camera somewhat more difficult to put back into service (although some DIY'ers have been known to convert them to 120 yeilding a semi-panoramic format - an interesting option if you are the crafty sort). The Six-16's versions do seem to be less common though, so the Six-20 is more likely what you have.

In either case, be aware that one defect for which these old monitors are notorious is pinhole light leaks in the bellows. You can test for this prior to running film through the camera by opening the back in a darkened room and shining a flashlight through the bellows. Look all along the folds of the bellows, especially in the corner creases, and see if you can see any light coming through what looks like tiny pinholes. Unfortunately, both of the monitors I have purchased are riddled with these pinholes and will need to be addressed before I can shoot without light leaks. But hopefully you will be more lucky than I was!
 

donkee

Member
Joined
May 3, 2011
Messages
219
Location
Mid Michigan
Format
Multi Format
I use a mix of Elmers Glue and India Ink (50/50) to coat the inside of the bellows on my Kodak folders. Works great with 2 coats at the corners. There are other recipes out there with shoe black and dish soap. They all should work.

Have fun with the Monitor!
 

mgb74

Subscriber
Joined
Jan 24, 2005
Messages
4,774
Location
MN and MA US
Format
Multi Format
Sometimes the easiest way to find a 620 spool (if you need one) is to check thrift stores for cameras with a 620 spool inside.

And, if anyone asks, you can say it's a 20 megapixel (more or less) camera.
 

Hatchetman

Member
Joined
May 27, 2011
Messages
1,553
Location
Chicago, IL
Format
Multi Format
Ideally you would have two empty 620 spools. Roll it onto the first, now the end of the film will be on the outside. Then roll it onto the second spool and you will be good to go. Make sure you keep everything tight as you roll and on the second rolling, make sure you catch the film when it appears under the paper (it is not attached). Of course do this all in the dark.
 

ME Super

Member
Joined
Apr 17, 2011
Messages
1,479
Location
Central Illinois, USA
Format
Multi Format
+1. This is the method I use, with 2 620 spools I got off of the big auction site for around $5 each. I do it in a changing bag. The hardest part is inserting the end of the paper into the slot on the 620 spool in the dark, so I do that part in the light, then shove my hand with the two spools into the changing bag and respool. It's not hard to hang on to both spools and keep the paper tight (to keep the film from being exposed to the light while you get the paper started onto the spool) in the light before shoving your hand into the changing bag. There's YouTube videos on how to do it, just search for "respool 120 film onto 620 spools" and you'll find a ton of videos showing how to do it.
 
OP
OP

semi-ambivalent

Member
Joined
Mar 26, 2011
Messages
733
Format
35mm
Thanks all. I'll have to wait until I get it. Thanks also for the film links. I had given up on finding 127, (my wife was given an immaculate baby gray a number of years ago by her employer).

s-a
 

Gerald C Koch

Member
Joined
Jul 12, 2010
Messages
8,131
Location
Southern USA
Format
Multi Format

I use Pliobond cement (rubber based) and lamp black for the purpose. The mixture is water proof and remains flexible.
 

Bob Marvin

Member
Joined
Sep 7, 2002
Messages
114
Location
Brooklyn, NY
Format
Medium Format
Before I had my Kodak Medalist II modified for 120 film I would run film through a 120 camera without exposing it [I used my Rolleiflex, without threading the film under the feeler roller] and then hand wound it onto a 620 spool in a changing bag. That way I only had to wind film once by hand.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…