LJH,
Just loaded the last of my 4x5 and 8x10, will be ordering in about 3 weeks for more. You could try and wedge 5x7 in your holder? Drop me a line if you have no luck.
Pat
You could perhaps buy a roll or two in 120; should be the same emulsion. Obviously you'll want to develop it using the same method you're planning on for the 7x17.
LJH,
Just loaded the last of my 4x5 and 8x10, will be ordering in about 3 weeks for more. You could try and wedge 5x7 in your holder? Drop me a line if you have no luck.
Pat
Got to admit I had a case of the stupids then. I thought, "there's no way I could get a 5x7 sheet into a 4x5 holder". And, minutes later, I realised that I shoot 7x17
I'm thinking that I might just bite the bullet and grab a box. Might make me shoot some more on the (dusty) 4x5.
You could perhaps buy a roll or two in 120; should be the same emulsion. Obviously you'll want to develop it using the same method you're planning on for the 7x17.
I'm a bit hesitant to do this as roll film is on a different base to sheet (roll's on a 100 microns thick poly base, while the sheet's on 175 microns). No idea if this makes a difference, but testing's about controlled results, so I don't really want to have a somewhat erroneous starting point...