Want to Buy Want old Ries tripod parts

binglebugbob · Mar 26, 2014

Mostly I need the knurled black knob with 1/4" x 20 threads that tightens the legs. (Kind of resembles the knob that often screws into the bottom of a camera case to attach it to the camera) I can send a picture if you think you might have one. Would consider a couple if you have them.

I won't tell you how I broke it*, but let's just say Ries tripods are surprisingly durable.
bob

OK, I was late to a meeting, had set it behind my Ford Ranger, was in a hurry, and backed completely over it. I don't see a mark on it except the knob broke. Yah, I'm surprised too. I thought I'd be picking up kindling or tooth picks.

Zathras · Mar 26, 2014

I'm not 100% sure about this, but I think it is still possible to get parts from Ries.

bdial · Mar 26, 2014

From their website;

Parts: Parts are available if you obtain a used tripod. Please Dead Link Removed us for information. A picture is extremely useful to identify the model and vintage of the tripod. Please email pictures and let us know which parts you need.

http://www.riestripod.com/support

They are in Bremerton, you could probably drive there.

binglebugbob · Mar 26, 2014

Yes, I can get parts from Ries, and I will if none turn up here, but I thought someone here might want to sell some (or maybe other spare parts from a junk box if they have them.) I bought a replacement top plate from Ries to replace the 1950s model that was on it (it had broken during the previous owner's ownership.) The new heads are being machined (milled?) and are stronger than the previous cast ones.

Part of it is, I'm torn between telling the owners what their tripod survived and telling them the dumb thing I did... (
bob.

John Koehrer · Mar 27, 2014

Ace hardware carries some similar knobs.
So does Rockler.com their business is woodworking stuff

binglebugbob · Mar 28, 2014

Thanks, I looked at some on both sites. They'd work fine, but I'm going to hold out for originals. If none turn up, I'll see if I can get Ries to bring one to the camera swap in Kent. They have reserved a display table there

JosBurke · Mar 31, 2014

I have a bag of vintage Ries goodies and there are some knobs for the earlier versions with the black wrinkle finish.
Pm me--can u provide a pic of the one you need to match?
--Joe Burke

binglebugbob · Mar 31, 2014

Ries Knob

I hope I've uploaded a picture of the knob.
bob.

JosBurke · Apr 1, 2014

What I have looks identical. What's the length of the threaded part on the other end. I think I have two different lengths.
Just email me directly.
--Joe Burke

Want to Buy Want old Ries tripod parts

Attachments

Privacy & Transparency

Privacy & Transparency