Viewing Slides - how?

Emil · May 12, 2009

Hello!

I have recently started shooting slide film, and I think it's a really great way to evaluate my shots.

I have a small viewer for mounted slides (I don't have mine mounted) and it works really well, but it doesn't magnify enough for critical viewing. It's the kind with an opaque dome on one end, and the eyepiece on the other end, and the slide in between. But I need a way to see them bigger, and in more detail.

What do you suggest I look for? I would love to have some device that let me see it bigger, but still backlit.

I have of course considered a projektor, but I don't have space for one. Plus it's the whole backlight aspect that makes it interesting for me

Thank you,

Emil

removed-user-1 · May 12, 2009

Emil said:
What do you suggest I look for? I would love to have some device that let me see it bigger, but still backlit.

If space is an issue, a decent quality 8x loupe (magnifying eyepiece without a viewer attached) and a desktop light box (8x10 inches or so) ought to do the trick. For the light box, look for one with 5000K lamps.

Steve Smith · May 12, 2009

When you say you don't have room for a projector, I assume you mean for the projector and screen and the space between them.

It is possible to buy a projector with its own integral screen which looks a bit like a portable TV and is about the same size.

Steve.

Emil · May 12, 2009

Steve, I know the type of slide viewer you mention, but I haven't seen one that would accept unmounted slide film. Otherwise that would be awesome.

Where would one shop for a desktop light box?

Ektagraphic · May 12, 2009

I really reccomend picking up a projector. It is the best way to view slides. You don't need too much room for one. They are pretty small and can just project onto the wall if you need them to.

Steve Smith · May 12, 2009

I'm not sure what you can do if you want to keep your slides un-mounted and, I assume, un-cut.

When I was at school (30 years ago) we had a projector which took 35mm film from reel to reel horizontally (stills, not movie). It looked a bit like a modern version of a lantern slide projector. Not much use if you don't have room for it though.

Steve.

Emil · May 12, 2009

Thanks for the input, all.
For me it would be a lot of trouble cutting and mounting the slides, I am just looking for a way to evaluate before I have prints made or scanning.

Anyone here use a microscope for evaluating? How much (or little) magnification is needed to see the fine detail?

Paul Jenkin · May 12, 2009

Have a look for a Braun M330AF Novamat (or 350AF Paximat) monitor projector.

http://www.morrisphoto.co.uk/ProductDetails~man~Braun~productID~6263~categoryid~225.html

You can project onto a wall or use the built-in screen that pops up. Extremely good. I have one and wouldn't be without it. I'm sure you'll be able to get one in Denmark.

Paul.

Emil · May 12, 2009

Wow, that looks great (although a little expensive). 21x21cm screen! Do you know if it will take unmounted film?

Nicholas Lindan · May 12, 2009

Get a decent projector, used ones go for less than the cost of a good loupe. Kodak Carousels are the standard and have a stack loader accessory. 60mm WA retrofocus lenses are available for getting a large screen image in a small space. Some Kodaks have a built-in flip-out monitor screen.

Darkroom317 · May 12, 2009

Is there any way, other than a light table, to view 120 transparencies?

Steve Smith · May 12, 2009

Darkroom317 said:
Is there any way, other than a light table, to view 120 transparencies?

An overhead projector perhaps?

Steve.

Ian Cooper · May 12, 2009

Of course - a 120 format slide projector!

They were made by a number of different companies, personally I have a Hasselblad PCP80, although before that I had a Procabin 6x7 for a short time - the 'blad lens is better quality and the use of a magazine feed is a lot easier to handle.

Lightproof · May 12, 2009

Try to get a second hand stereo microscope like this: http://seoenterprises.com/shop/image.php?productid=16208
and a flat light table. Place the table under the microscope and put your slide on it. I recommend the use of a light table over the use of a microscope that is already prepared for transmitted-light microscopy because of the known light temperature of common light tables.

Silverhead · May 12, 2009

Emil, I have several Kodak carousel projectors and I can tell you from experience that they really don't take up a lot of room. You can project a decent-sized image onto a wall from only a few feet, which should be large enough for most of the evaluating you'd be doing. If you got a stack-mount slide projector, that might take up even less room...Vivitar made a decent one, IIRC. Obviously you'd need to research the dimensions of each, but that shouldn't be too hard.

DannL · May 12, 2009

Scan your slides and view them on a monitor or via projection. The APUG gallery for example is comprised of scanned images, photographs and slides of varying dimensions. You would want to scan at resolutions that work best for your viewing equipment.

Ektagraphic · May 12, 2009

Some of the Dukane filmstrip projects sound like they will do you well. They will project rolls of unmounted film.

Francis in VT · May 12, 2009

Nicholas Lindan;797468]Get a decent projector, used ones go for less than the cost of a good loupe. Kodak Carousels are the standard and have a stack loader accessory. 60mm WA retrofocus lenses are available for getting a large screen image in a small space.

In addition, Kodak sold an Audio/Visual adapter which replaced the Carousel Lens. This A/V adapter had cranks and sprockets to show strips of slide film.

Nicholas Lindan · May 13, 2009

The A/V strip projectors are designed to show 1/2 frame - well actually full movie frame, 1/2 35mm still camera frame. The film moves vertically through the projector. The problem with projecting a roll of slides is that you need to take all pictures in one orientation or have a rotating strip film holder.

Time has shown that putting slides in individual mounts is the best way to handle them.

I even mount my most used 35mm B&W negatives in slide mounts - it cuts down on handling strips of film in the enlarger and eliminates the problem of scratches.

Film strips are (were) used in A/V settings because of ease of handling, compact storage, and low cost. Scratched and dusty film was considered the norm.

Viewing Slides - how?

Emil

removed-user-1

Steve Smith

Emil

Ektagraphic

Steve Smith

Emil

Paul Jenkin

Emil

Nicholas Lindan

Advertiser

Darkroom317

Steve Smith

Ian Cooper

Lightproof

Silverhead

DannL

Ektagraphic

Francis in VT

Nicholas Lindan

Advertiser

Viewing Slides - how?

removed-user-1

Advertiser

Advertiser

Privacy & Transparency

Privacy & Transparency