If you want something inexpensive to get you started, they sell GE 22" black light fixtures on Amazon for $20-ish each. Put yourself a rack of them together and you'll be good to go - I used 12 of them to build a UV light box for the school where I teach, plugged into a 12-outlet surge strip, which is then plugged into a Gra-Lab timer. With the plywood box to house them, the lamps, the surge strip, and the Gra-Lab, you're into it for about $300-350, give or take, and you can make 22x30 inch prints at the largest, or expose 3 8x10 prints simultaneously.