Using ancient Kodak C-22 kit

John Shriver

Member
Joined
Sep 8, 2006
Messages
482
Format
35mm RF
Some time ago I bought an old Kodak C-22 processing kit,the 1 pint size. Intent is to use it to redevelop a roll of C-22 I took 45 years ago and processed some years ago as B&W. I read in Kodak Publication AE-31 that you can just bleach the film in fresh E-6 bleach, re-expose the silver halides, and process as color.

So the first question is whether the chemistry in the C-22 kit has any chance of being good.

Will part A of the developer (contains 4-amino-N-ethyl-N-(β-methane sulfonamido-ethyl)-m-toluidine sesquisulfate monohydrate) still be good? (I presume this is a form of CD-3.)

Will part C of the developer (contains benzyl alcohol) still be good? That bottle is still liquid.

The bottle of part B of the hardener appears to contain a brown powder at this time, the caution label says it contained formaldehyde and methanol. Has that gone bad?

The next question is what parts of the process need to use C-22 chemistry? Obviously the developer. I presume I can use any stop bath. Do I need to use that C-22 hardener, or would Flexicolor Stabilizer III have enough formaldehyde to harden the emulsion? I presume any rapid fixer will do.

From a posting by Ron Mowrey, I see that I have to use the C-22 ferricyanide bleach to transform the lueco dyes to their final form.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
Do NOT use E6 or C41 bleach to regenerate the silver halide image, as it fixes out part of the image. Use a standard rehal bleach with Ferricyanide.

The liquid (benzyl alchohol) should be good. There is about 5 ml/L in C22. The part with the CD3 should be a fine brown powder. If it is black or gooey it is bad. You have to replace it with fresh CD3 which is about 5.1 g/l IIRC.

Part b of the hardener should be a clear liquid.

The current Flexicolor Stabilizer contains no formalin at all and so you would have to use the original stabilizer.

You need a Ferricyanide bleach to convert the C22 leuco dyes into their final form.

PE
 
OP
OP

John Shriver

Member
Joined
Sep 8, 2006
Messages
482
Format
35mm RF
I'm confused. AE-31 says to use fresh E-6 or C-41 bleach to regenerate the silver halide image, with the emphasis on fresh and free of hypo. Could I use the C-22 bleach for this step? (Saves one solution, and it would be hypo-free at that step in the process.)

Any suggestions on replacing part B of the hardener? Or can I use Flexicolor Stabilizer III as the hardener, which I already have? Or would the surfactant in it mess things up?
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
The writer of that is wrong then.

There is enough ammonia in either bleach to cause some fixation to take place causing loss of detail. Also, they are not designed for rehal work. Sorry. At EK we used a Rehal Ferricyanide bleach for this due to the very problem I am describing. It will work, but poorly, and with loss of image quality.

If you use a ferricyanide rehal bleach, you should use a sulfite clearing bath afterwards, and then a good wash before going into the color developer. Also, you must do the entire process in the light to reexpose the new silver halide. It will be very slow. You will have to expose the front and back of the film.

PE
 
OP
OP

John Shriver

Member
Joined
Sep 8, 2006
Messages
482
Format
35mm RF
Kodak's AE-31 must be somewhat compromised to use standard products then.

So the Rehal Ferricyanide bleach would be Potassium Ferricyanide and Potassium Bromide. As in (there was a url link here which no longer exists)?

Hmm, the C-22 packaging says part B of the bleach is Potassium Ferricyanide and Potassium Bromide. Part A is Sodium Nitrate. I suppose I could just mix part B first, use it as the rehalogenating bleach, and then add part A for the final bleaching after redevelopment. Or will the Sodium Nitrate not cause any fixing of the film?

The clearing bath would be sodium sulfite, right? (Or Hypo Clearing Agent.)

Kodak does call for a substantial re-exposure with a No. 1 photoflood lamp. They also call for a 15 minute wash after bleaching.

The entire process from bleaching through redevelopment and fixing can be done in the light, right? Plus there's no harm in waiting a while between the bleach step and the redevelopment, since I'd need to take time to add part A to the bleach.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
John;

The bleach in your reference contains thiourea which is a FIXING AGENT. OMG, you will destroy the image totally!!!!!!! It also contains HYPO.

Please read up on things and understand them before you leap. You appear to have completely misunderstood this process!

PE
 
OP
OP

John Shriver

Member
Joined
Sep 8, 2006
Messages
482
Format
35mm RF
I was referring the formula later in that page:

Stock Solution A
Potassium ferricyanide 64 g
Potassium bromide 30 g
WTM 250 ml

That corresponds with other pages I've been looking at on rehalogenating bleach.

My understanding is that the rehalogenating bleach turns the metallic silver in the negative back to a silver halide, then I re-expose it to a lot of light. That gives me an exposed negative, which the color developer will then develop and activate the dyes that are still (somewhat) in the emulsion. Then I bleach and fix, and have a color dye negative. I realize the results will be pretty lousy, but I'm really curious to see the first roll of color film I took developed in color.

I'm trying to pull this off without winding up with a huge stock of leftover chemistry. The C-22 kit was a modest investment, although I'm going to have to muster a lot of bottles to store it in once mixed.
 
OP
OP

John Shriver

Member
Joined
Sep 8, 2006
Messages
482
Format
35mm RF
Would there be any hypo or fixer in the C-22 bleach? The 1965 BJP "formula" for C-22 bleach is:

potassium ferricyanide 40g
potassium bromide 15g
disodium phosphate (anyhdrous) 10g
water to make 1l

I don't have Kodak's formula, I just know that the "hazardous" ingredients in the kit are Potassium Ferricyanide, Potassium Bromide, and Sodium Nitrate. Do these sodium compounds give them fixing properties, or are they preservatives or pH buffers? Obviously, for the normal use of the C-22 bleach, it would be fully OK if it did some fixing, bu that's not OK for my use.

Trying to see if I can use the C-22 bleach for this as the ingredients for the rehalogenating bleach will set me back $32 at the Formulary, more than the C-22 kit cost.

I also hope my CD-3 is OK, since the Formulary doesn't stock it.
 
OP
OP

John Shriver

Member
Joined
Sep 8, 2006
Messages
482
Format
35mm RF
So will Kodak C-41 Fleixcolor Stabilizer III (with Formaldehyde) work as a substitute for the dead "hardener" in the C-22 kit?

Where can I get CD3 if the packets in my C-22 kit are shot? Not listed in Photographer's Formulary online catalog. None at Bostick and Sullivan. Listed at Silverprint in the UK, but it's impossible to ship to the US. It would be frustrating to be stymied for lack of one gram of CD3.
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
The C-22 hardener was more like this:

Formalin 37%, 10 ml/L
Sodium Carbonate, 25 - 50 g/L
Sodium Sulfate 25 - 50 g/L
pH to 10.0 with Sodium Hydroxide or Sulfuric Acid solution (IDK the conc used but probably 10%) as needed.

At one time, they used a chrome alum hardener as well. I do not have that formula.

PE
 
OP
OP

John Shriver

Member
Joined
Sep 8, 2006
Messages
482
Format
35mm RF
That looks great. Looks like they're also willing to sell smaller quantities than listed, since I won't need 100g. I've got a box of 250ml glass bottles on the way, then I'll see if the developer is OK.
 

Mike Wilde

Member
Joined
Aug 10, 2006
Messages
2,903
Location
Misissauaga
Format
Multi Format
PM me if you need CD-3 - I have CD-3 (a pound or so from Artcraft) name your gram needs, and I will post it to you in a tiny baggy. I bought it when DIY mixing my RA-4. Then I found a roller processor for a song, and the DIY aerially oxidized too quickly.
 

pacorocha

Member
Joined
Jun 10, 2009
Messages
8
Format
4x5 Format
develop c22 film. kodak ektacolor type-s 4x5 film

Hi, i´m very happy found this thread.

i´m starting an project with this film. I bought some boxes of ektacolor type-s 4x5 and "ektacolor print film type s" ( i supose it´s the same or very similar) and a lot of 120 rolls (some c-22 and others in c-41process, this expired in 70`s.
i don´t know much about raw chemicals, but i have a friend of mine help me with this. In Spain is very difficult to found CD3.
If you can help me, please answer my questions. There is a commercial chemical and preparation which may reveal these films with a decent result, or I have to prepare the official formula of the product??

Some days ago I found this recipe.
http://www.ehow.com/how_4673066_develop-film.html

In my previous research, I have also found what appears to be a Defense Department document of the United States in which reference is made to study alternative development process of these films. I have been in contact with them but I have high hopes of getting an answer. if any of you can help me with this issue (I'm not in the U.S.)
http://www.dtic.mil/srch/doc?collection=t3&id=AD0757146

I hope my work will also help you, sorry for my english is very bad, how the translator of google .....
 

pacorocha

Member
Joined
Jun 10, 2009
Messages
8
Format
4x5 Format
Mix the hardening solution (pH 10-4 to 10-8) as follows: Mix 20 ml formaldehyde (35 to 45 percent solution) and 10 g sodium carbonate; add water to 1000ml. The hardener temperature should be between 68 and 75 degrees Fahrenheit. Place the film in the hardener for four minutes.

Photo E. you recomendation is formalin not formaldehyide?
 

Mike Wilde

Member
Joined
Aug 10, 2006
Messages
2,903
Location
Misissauaga
Format
Multi Format
IFAIK formalin is a saturated 37% solution of formaldehyde in water. There is also paraformaldehyde, which I have as dry flakes. The papra is used in some lithographic developer formulae.
 

wblynch

Member
Joined
Feb 9, 2009
Messages
1,697
Location
Mission Viejo
Format
127 Format

I have some C-22 Kodacolor X hanging around in 127 and 126. I'm going to try out the cold C-41 and see what happens. When I tired with warm C-41 (100*f) I got nothing but a magenta mess.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…