Use of Jobo 2509N reel with 2840 tank

rwyoung

Member

Joined

Apr 18, 2006

Messages

708

Location

Lawrence, KS

Format

Multi Format

• Apr 25, 2006

• #1

I have read in a few different places that the base and lid of the 2840 print tank when put together without the center section make a tank the same size as the 2521 (2523) tank.

If this is so, can I just use the 2509N reel for 4x5 development in that tank? As parts from a print tank I won't have a center column inside and the lid is a bit different, cup vs. funnel type.

Thanks for the help.

 

Nick Zentena

Member

Joined

Nov 21, 2004

Messages

4,666

Location

Italia

Format

Multi Format

• Apr 25, 2006

• #2

Without going to check the 2840 is equal to the 2561 tank. I think. Not the slightly smaller 2551.

The centre column and funnel are needed to complete the light trap. Plus trying to put the amount of chemicals film tends to require into tank using the cup is going to be slow.

If you pick up a centre column and a funnel then you can convert the print tank to a film tank.

 

Nick Zentena

Member

Joined

Nov 21, 2004

Messages

4,666

Location

Italia

Format

Multi Format

• Apr 25, 2006

• #3

Okay I went to check. To correct.

The 2840 is the 11x14 tank. It's equal to the 2581 film tank.

The 2830 is the 8x10 tank it's equal to the 2561 tank.

 

OP

OP

rwyoung

Member

Joined

Apr 18, 2006

Messages

708

Location

Lawrence, KS

Format

Multi Format

• Apr 26, 2006

• #4

Thanks Nick. Just for the hellofit, I tried processing some 4x5's in the base of the 2840 tank (removed the middle section) by springing the negatives between two sets of ridges.

Worked but pretty precarious position. And only 2 negatives at a time.

I've read some of the other threads here about making/modifying holders for the tanks but I think I would be better off with a 2905N reel and 2521 tank.

Fun toy! Gotta get some 4x5 chrome film and 3 step E6 kit now!

 

Ole

Moderator

Moderator

Joined

Sep 9, 2002

Messages

9,245

Location

Bergen, Norway

Format

Large Format

• Apr 26, 2006

• #5

rwyoung said:

Thanks Nick. Just for the hellofit, I tried processing some 4x5's in the base of the 2840 tank (removed the middle section) by springing the negatives between two sets of ridges.

Click to expand...

You need a few of the "plastic macaronis" - the things made to hold prints in place. I do most of my 5x7's in the 2830, four at a time (you really want the "winged macaronies" for that, though). Or two 8x10's, or one 24x30cm, or one 30x40cm in the 2840. I'm thinking of getting a stack of reels and center tubes so I can do lots of 4x5", 9x12cm, 6.5x9cm and 120 / 35mm at the same time.

 

Nick Zentena

Member

Joined

Nov 21, 2004

Messages

4,666

Location

Italia

Format

Multi Format

• Apr 26, 2006

• #6

rwyoung said:

I've read some of the other threads here about making/modifying holders for the tanks but I think I would be better off with a 2905N reel and 2521 tank.

Click to expand...

If you add the funnel and centre column to the bottom of the 2840 tank you've got a 2521 tank

I also use the print tanks for 5x7 and above but have never needed the print clips. Plus Jobo doesn't sell them anymore. If anything my biggest problem is getting the negatives out.

 

Ole

Moderator

Moderator

Joined

Sep 9, 2002

Messages

9,245

Location

Bergen, Norway

Format

Large Format

• Apr 26, 2006

• #7

The print clips are really nice to have when you've got two 18x24cm Efke films flaffing about in there on the CPE-2...