US Products for cleaning an old enlarger

Jersey Vic

Member

Joined

Aug 25, 2004

Messages

3,926

Location

Tivoli, NY

Format

Holga

• Jul 21, 2008

• #1

I'm cleaning up the old Durst S-45 that sat idle for 5 years or so and I'm thinking of using Simple green on the outside surfaces and WD-40 on the column and other friction areas where some old grease has dried out. Good idea? Disaster? Thanks in advance

Victor

 

Nicholas Lindan

Advertiser

Advertiser

Joined

Sep 2, 2006

Messages

4,277

Location

Cleveland, Ohio

Format

Multi Format

• Jul 21, 2008

• #2

Jersey Vic said:

I'm cleaning up the old Durst S-45 that sat idle for 5 years or so and I'm thinking of using Simple green on the outside surfaces and WD-40 on the column

Click to expand...

Windex and SAE-30 oil. WD-40 dries out and becomes a sticky mess - great for loosening things that are stuck or getting rusty parts going again - but not for general lubrication. If you need something stronger than Windex use Ronsonol or Zippo lighter fluid.

 

reellis67

Subscriber

Joined

Mar 10, 2005

Messages

1,885

Location

Central Flor

Format

4x5 Format

• Jul 21, 2008

• #3

As stated above, WD-40 is not a lubricant, so it's not likely your best choice. Simple Green should be safe on the surfaces, it's pretty safe stuff for most all uses. I've never replaced any lubricant on the gears in my enlargers, but if I were to do so, I believe that a SMALL amount of white lithium grease would do. Too much and you'll have dust sticking to it (the reason not to use oil).

- Randy

 

Jon Shiu

Subscriber

Joined

Dec 2, 2003

Messages

3,293

Location

Mendocino, California

Format

Plastic Cameras

• Jul 21, 2008

• #4

WD40 is mostly a solvent, so it is pretty good at loosening up and removing gunky grease. Just wipe it all off after with rags/paper towels.

Jon

 

Curt

Member

Joined

Sep 22, 2005

Messages

4,618

Location

Pacific Nort

Format

Multi Format

• Jul 21, 2008

• #5

Lubriplate Multi-Purpose Grease is the best you can get, WD40 will clean up the hardened gunk and other hardened materials. Powermatic told me about Lubriplate grease for use on my shaper and cabinet saw gears and mechanisms.

 

Nicholas Lindan

Advertiser

Advertiser

Joined

Sep 2, 2006

Messages

4,277

Location

Cleveland, Ohio

Format

Multi Format

• Jul 21, 2008

• #6

Curt said:

Lubriplate Multi-Purpose Grease is the best.

Click to expand...

Very good stuff, but I find it separates over time.

If you are going out to get something special in the way of grease for photographic use may I suggest Corning High-Vacuum Grease: it is thick and sticks to where it is put; it won't flow under it's own weight; it doesn't separate and throw oil; it doesn't outgas; works over a wide temperature range; etc.. Ideal for re-greasing focusing helicoids.

Stay far away from 'Lith-Ease', 'Sil-Glide' and generic lithium grease (Panef): they start to come apart as soon as you apply them.

 

OP

OP

Jersey Vic

Member

Joined

Aug 25, 2004

Messages

3,926

Location

Tivoli, NY

Format

Holga

• Jul 22, 2008

• #7

Thanks alot for the very good and detailed info.