What About Bob said:The specs for this new tripod state that the max load is 22 pounds / 10 kilograms.
Is your issue with the tripod or the head? It sounds like you have an Arca-Swiss type of quick release. Unless the head is light-duty or it is a poorly-made copy, it should hold your Hasselblad and a 120 with no problem. I have used the RRS QR system (Arca-Swiss style) with a view camera.
I found that Induro Tripods are as strong the big name tripods and have parts that are interchangeable big name tripods at more economical prices.
For several decades I lugged around a 3 series metal Gitzo. Probably one reason my shoulders are so bad. I have two heads, both are Gitzo I've had for years. Neither is a ball head. They are big pan/tilt variations, one a QR and the other a large non QR mounting platform. I was never happy with the ball heads I tried. I have been using a Gitzo a 2 series carbon fiber traveler tripod with both heads. I like the weight they place on the tripod for great stability. I shoot with a Hasselblad, the longest lens is the 150, I also use Canons with many L-series lenses.
The 'load' bearing capacity for tripods is a joke...there is no standard of test to prove any claim! This old ad by Bogen illustrates the farce that 'load capacity' truly is...
...do you know of any company that claims their tripod will support a person?!
I carried a Bogen 3221 aluminum for many years, but used with a Linhof Profi head, which was better locking than Manfrotto (I almost head camera+lens hit the ground from an inadvertant release of a Manfrotto without secondary safety lock). With an aging decline in the desire to carry as much weight, I switched to Gitzo carbonfivber after they developed their new (current) twistlock, as their old locks were a pain to use; I changed to RRS head with lever release, and have had zero remorse.
Looking at the tripod online, I see no problem with it if it is well-made with decent materials. It is an inexpensive tripod, though, and that could lead to corners being cut. But the mounting plate is an Arca Swiss type (a proven and trusted mounting method) and should be sturdy enough for any camera that the ballhead can handle. Just make sure the knob is tight after mounting the camera to the head. I would be more concerned with the ballhead slipping with a heavy or unbalanced load.Not much with the head part but more to do with the way of securing the plate to the head. There is one screw knob on the side and for some reason it doesn't give me a feeling of true security. When my Bogen locks you know it locks. That gives me more confidence that the camera will not come undone. With this new tripod I do not get that same feeling of security.
The camera plate for this new tripod is a small rectangular plate with a flip-turn key underneath. Bogen one is a hexagon, grey with a padding layer on top of it.
Update: I see that name Arca Swiss mentioned. When I looked back at the tripod I bought. I got one of those K&F Concept tripods.
Don't worry about the mounting system. I personally wouldn't put a medium-format camera on that tripod.I got the K&F Concept 78 inch Camera Tripod for DSLR Compact Aluminum Tripod with 360 Degree Ball Head and 10KG Load for Travel and Work K234A7+BH-28L (S210)
Don't worry about the mounting system. I personally wouldn't put a medium-format camera on that tripod.
A good source for information and some reviews: https://thecentercolumn.com
This Wednesday all of my Hasselblad gear will be going in for a full service and CLA. I'm getting her done. If I am going through this process then I think it may be for the best to just stick to using the metal beast until I can get my hands on something that is like the Bogen but a little bit lighter and yet more secure.
I know this is OT-hopefully I’m forgiven-but who are you using for Hasselblad service?
Of course, for something like backpacking or airline travel, carbon fiber makes more sense. But then you need to make sure the unit has enough bully mass to resist wind gusts or spongy ground, etc.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?