tmax first developer question

danzyc · Aug 24, 2007

hello the tmax first develepor of the slide kit is the same that a tmax developer
for negative?

thanks

Tom Hoskinson · Aug 24, 2007

Kodak TMax Developer for reversal processing

danzyc said:
hello the tmax first develepor of the slide kit is the same that a tmax developer
for negative?

thanks

Several workers have reported that Kodak's standard TMax Developer product (for negative development) works ok as both the first and second developer in B&W film reversal processing.

HC110 is also used by a number of workers, as is Dektol and the Ilford PQ paper developers. Rodinal is also used by some workers.

See: http://photo.net/bboard/q-and-a-fetch-msg?msg_id=007K4f

TMax Developer, HC110 and Rodinal are all concentrated stock solutions that have the attribute of a long shelf life.

danzyc · Aug 24, 2007

should i use tmax developer full strenght? or as manual describe 1+4?

thanks

Tom Hoskinson · Aug 24, 2007

danzyc said:
should i use tmax developer full strenght? or as manual describe 1+4?

thanks

I would try it at 1+4. You may decide to try a stronger or weaker dilution based on your 1+4 results.

danzyc · Aug 25, 2007

tom if i bleach for a long time would have more contrasty image?

i normally bleach my trix reversal for 4 minutes.....

Tom Hoskinson · Aug 25, 2007

Bleach and redevelopment in reversal processing

danzyc said:
tom if i bleach for a long time would have more contrasty image?

i normally bleach my trix reversal for 4 minutes.....

The purpose of the bleach step is to remove ALL OF THE EXPOSED SILVER - which has been developed by the first developer.

So, you need to bleach only for a sufficient amount of time to remove all of the exposed silver.

After bleaching, the remaining unexposed silver is then fogged (either light fogged or chemically fogged) to form the positive image - which must then be developed (second developer).

To increase the contrast of the positive image, use a second developer like Kodak D-19 and/or increase the second development time.

See: http://www.silverprint.co.uk/PDF/reversal_web.pdf

Also See: Dead Link Removed

Tom Hoskinson · Aug 26, 2007

Alessandro Serrao said:
I think the contrast can be manipulated only by lenghtening the first developer time 'cause the second development is done to completion only.

For this purpose I feel 1+4 TMax dev is way too diluited as the first dev.
You maybe can use it as the second dev but with a 1+2 diluition or something alike.

Many workers use Kodak D-19 (undiluted) as BOTH the first developer AND the second developer.

The silver that is developed by the first developer will all be bleached out in the bleach step.

The remaining silver (unexposed and undeveloped) is then either given a fogging exposure or is chemically fogged. The fogged silver is then developed by the second developer.

tmax first developer question

danzyc

Tom Hoskinson

danzyc

Tom Hoskinson

danzyc

Tom Hoskinson

Tom Hoskinson

Privacy & Transparency

Privacy & Transparency