Times for Pyrocat MC

Peter Schrager

Subscriber

Joined

Jul 19, 2004

Messages

4,185

Location

fairfield co

Format

Large Format

• Jul 20, 2006

• #1

I'm going to order some of the Procat-MC (which is on sale at the Formulary)
Going to try it on some 35mm film. Offhand I'm looking at using FP4; Acros and Foma T200. I need some starting times either regular or rotary. Any help would be much appreciated.
Thanks, Peter

 

Tom Hoskinson

Member

Joined

Mar 7, 2004

Messages

3,867

Location

Southern Cal

Format

Multi Format

• Jul 20, 2006

• #2

Peter, with Foma T-200 I got good results with Pyrocat-MC and minimal agitation for 14 minutes at 21 C.

With Efke 100 and minimal agitation, I used 16 minutes at 21 C (this should provide an ok starting point for FP-4).

Here are my results for TMAX 400 in Pyrocat-MC with semi-stand agitation:
(there was a url link here which no longer exists)

 

OP

OP

Peter Schrager

Subscriber

Joined

Jul 19, 2004

Messages

4,185

Location

fairfield co

Format

Large Format

• Jul 20, 2006

• #3

thanks

Thank you Tom!!
Peter

 

lee

Member

Joined

Nov 23, 2002

Messages

2,911

Location

Fort Worth T

Format

8x10 Format

• Jul 20, 2006

• #4

fp4 at 64 and 68F with 2+2+100 it works out to 8.5 for condensers and 10 min for coldlights rotory processor

lee\c