The Maxxum/Dynax hotshoe-ectomy?

Vonder · Jul 14, 2010

I received and eBay-bought Minolta 5400HS flash yesterday, but the hotshoe is trashed. I can get at 2000xi flash for a song, so I was wondering if I could swap the shoe. Anyone know if this can be done? The bottoms of the flash are different, but the shoe is the same, so it looks like I should be able to do this...

Or if anyone has a dead 5400HS they'd be willing to part (no pun intended) with, I'd be interested!

Ralph Javins · Jul 15, 2010

Good morning, WolfEye;

I believe that you can. Let me look at my 5600HS (D) and one of the 'xi flashes to confirm that the shoe is the same; I think that they are.

Vonder · Jul 15, 2010

Ralph Javins said:
Good morning, WolfEye;

I believe that you can. Let me look at my 5600HS (D) and one of the 'xi flashes to confirm that the shoe is the same; I think that they are.

I think they are too, so I went ahead and bought the 2000xi. I took the 5400HS apart last nigh and the hotshoe itself is wired to a connector which plugs into a socket inside the flash body. If the 2000xi has the same thing it should be an easy fix. The shoe and a tiny PCB is held on by four internal screws.

winjeel · Jul 18, 2010

I haven't done it, but I think it shouldn't be a problem. I have the exact same flash, and it's a nice tight fit on the Minolta Alpha Sweet II (probably sold as Dynax 5 in Europe), but is pretty loose and wobbly on the Sony A200.

Vonder · Jul 20, 2010

No go. Took the 2000xi apart only to learn the connector plug is totally different. The 2000xi plug is a 4-pin while the 5400HS is six. Looks like the 5400 is trashed until I can find a nonworking one to buy cheap.

The Maxxum/Dynax hotshoe-ectomy?

Vonder

Ralph Javins

Vonder

winjeel

Vonder

Privacy & Transparency

Privacy & Transparency