Tetenal Gold Toner to be discontinued

[henpe]

I was about to try out gold toning, only to discover that Tetenal Gold Toner is to be discontinued:
https://tetenal.com/en/homepage/consumer-shop/lab-auxiliaries/101126/goldtoner-1-l

Is there an equivalent product to use instead? My aim is to produce cold blue hues.

/Henrik

 

[AgX]

I find interesting that it is was not a old-stock remnant from old Tetenal but a product from Tetenal 1847.
(But maybe it was old stock and just got a safety-data sheet with new name on it.)

 

[AgX]

Is there an equivalent product to use instead? My aim is to produce cold blue hues.

see here at Moersch:
https://www.moersch-photochemie.de/content/shop/toner/177

 

[Sal Santamaura]

see here at Moersch:
https://www.moersch-photochemie.de/content/shop/toner/177

Based on an answer to my question received from Wolfgang Moersch, I suspect his MT10 gold toner might be closer to the Tetenal product than his MT6 is:

https://www.moersch-photochemie.de/content/shop/toner/94​

 

[mshchem]

Kodak Blue toner is published. You need Gold chloride. It gives very rich Blue tones on warmtone papers like Fomatone. Gold toner is amazing.

 

[Lachlan Young]

@Sal Santamaura You are correct - MT6 is the very different Nelson's Gold toner - of which I have a bottle in front of me in my darkroom as I type this. MT10 and the Tetenal product are pretty standard issue gold & thiocyanate toners as far as I can tell - which are hardly difficult to mix, apart from the excruciating price of gold chloride.

 

[AgX]

Based on an answer to my question received from Wolfgang Moersch, I suspect his MT10 gold toner might be closer to the Tetenal product than his MT6 is:

https://www.moersch-photochemie.de/content/shop/toner/94​

Good point. I just scrolled down his list of toners until I found a goldtoner, and just one. I did not expect several positions further down, out of sight, a second goldtoner to show up.