Tessina L instructions

millardmt

Member
Joined
Sep 2, 2016
Messages
50
Format
Multi Format

Just for the hell of it, cut your next load short. Try winding on a 15-inch strip instead of the usual 18. I don't like those "wrinkles" in the final few exposures.
M
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
The marks at the perforation holes in post #20 clearly indicate that the film has been exposed to light when being wound, even exposed repeatedly with the film windings or the light source moving inbetween.
 

Lourie Zipf

Member
Joined
Apr 17, 2020
Messages
22
Location
Colorado
Format
35mm
Shooting another strip of film in the next few days, and will post my results sometime this weekend. Will only shoot a 15 inch roll this time. Not sure how the film could be exposed to light when wound, but will do it in a dark place this time. Thanks.
 

Lourie Zipf

Member
Joined
Apr 17, 2020
Messages
22
Location
Colorado
Format
35mm
I have another question Mark. How to you secure your film to the Tessina cassettes? I use a little scotch tape, but not much. Thanks.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,389
Location
Southern California
Format
Multi Format
Lourie Zipf said:
I have another question Mark. How to you secure your film to the Tessina cassettes? I use a little scotch tape, but not much. Thanks.
Click to expand...

The spools of my have slots. Compress the ends together and the slots open up.
 

millardmt

Member
Joined
Sep 2, 2016
Messages
50
Format
Multi Format
Lourie Zipf said:
I have another question Mark. How to you secure your film to the Tessina cassettes? I use a little scotch tape, but not much. Thanks.
Click to expand...

Lourie,

Sorry. I rarely visit this or any other site. Everybody I know just uses masking tape. (I use [https://www.amazon.com/Scotch-Removable-Repositionable-Engineered-811-2PK/dp/B001PMGBY6/ref=sr_1_9?dchild=1&keywords=3m+photo+tape&qid=1588291854&sr=8-9].)

There is a very, very, very prolific poster named Martin Tai who doesn't use any tape at all [https://www.photo.net/discuss/threads/how-to-attach-film-to-tessina-cassette-never-use-tape-again.510460/].

Gerald McMullon's site -- "submin.com" [which is the neatest camera website in the world!] -- advises to let the newly loaded Tessina spool sit for a while ... "http://submin.com/35mm/collection/tessina/index.htm".

Specifically, Gerald says "The Tessina uses a plastic film cartridge to take the short length 35mm film. The daylight loader enables the film to be transferred from a standard 35mm cartridge to the Tessina cartridge and cut after the appropriate number of turnings. Care has to be taken in making sure that the film is secured to the spool of the Tessina cartridge otherwise it will dislodge in the camera and be unable to be rewound before removing the film. Likewise the film has to be secured to the take up spool otherwise it will slip and not advance. This is more difficult with modern films that have a thicker base and more rigid plastic. It is advisable to let the film settle in the cartridge a few days as this easies film transport and avoids jamming the delicate mechanism of the camera."

Marc
 

Lourie Zipf

Member
Joined
Apr 17, 2020
Messages
22
Location
Colorado
Format
35mm
Thanks, this is very helpful. I don't use masking tape, it leaves too much residue. A little scotch tape seems to work pretty well. It's just important to keep it secure.
 

Lourie Zipf

Member
Joined
Apr 17, 2020
Messages
22
Location
Colorado
Format
35mm
Hi Marc,
Well, shot another strip this weekend...15 inches long and agitated as precisely as I could. And even used another canister. I'm still getting the vertical black bars in the first few images and getting a white horizontal line through the images. There is obviously something in the camera. A little frustrated because was assured the camera had just been serviced and cleaned. Bought it on ebay from a buyer who had a %100 feedback rating. Need to do a scan to see how bad the white horizontal line is. I don't really care about the black vertical bars. Lourie
 

Attachments

  • 20200504_105852.jpg
    595.3 KB · Views: 75

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,085
Location
Delta, BC Canada
Format
Medium Format
I get something similar if I bulk load film into a cassette which has damaged felt where the film leaves the cassette.
Usually only near the end of the film though.
 

Lourie Zipf

Member
Joined
Apr 17, 2020
Messages
22
Location
Colorado
Format
35mm
I thought it might be the cassette, but I used a different one. The line seems to be in the same place. Maybe it's the daylight loader, but I don't know how that could be possible (?) Going to try another cassette, and will keep experimenting. Still happy that the camera is shooting images.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,389
Location
Southern California
Format
Multi Format
The vertical lines are light leaks in the film cassette or from loading. I cannot provide help on the horizontal line.
 

millardmt

Member
Joined
Sep 2, 2016
Messages
50
Format
Multi Format

This is a very stupid question - so please don't be offended - but is it possible the camera back is not securely closing?

My only other thought is that there's a fault with the loader, but I can't envision exactly how it could fail in a way that would produce these results.

Why not email Radu at "service@3rcamera.com"? (You could call him -- he's a very nice guy -- but you'll have to give him time to scrutinize your uploads either way, so you might as well email him the URL to this thread.)

Marc
 
Last edited:

Lourie Zipf

Member
Joined
Apr 17, 2020
Messages
22
Location
Colorado
Format
35mm
No, not a stupid question. It's closing completely. I've checked it repeatedly. It could be the loader. I may call him. The vertical black lines don't bother me too much, but I don't like the horizontal line going through the images. Thanls for the phone number.
 

reddesert

Member
Joined
Jul 22, 2019
Messages
2,417
Location
SAZ
Format
Hybrid
I don't know anything about Tessinas in particular. The vertical dark lines that run through the sprocket holes are light leaks as everybody suspects, whether from cassette, loading, etc I don't know. The horizontal dark line only appears in the exposed region - it doesn't run across the blank spaces between negatives - so it is probably a light leak or reflection at the moment of exposure.
 

millardmt

Member
Joined
Sep 2, 2016
Messages
50
Format
Multi Format
Lourie Zipf said:
Hi Marc, I had a bad fall while walking my dog on Saturday, so I won't be doing any shooting for a couple of weeks. When I do, I'll be sure to post something.
Click to expand...

Sorry. I'm a busybody!
Get well and kiss your puppy.
Marc
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…