Tech IV w/ 65mm?

Anyone know what the minimum draw is ob a linhof technika IV? I'm hoping to use my nikon 65mm on it without having to buy that expensive wide angle adapter... If I got, say, a 20mm recessed board, would that work?

Funny, but I have the 65mm SA and it just wouldn't work with the Tech.V that I have. I mostly use a 90mm with that recessed board and even that is pretty well back for comfort. As luck would have it I found a wide angle adapter locally for reasonable money so now can use the 65 (bought a 75 as well)
The wide angles are a bit of an Achilles heel on the Linhof's, but the WA adapter is an answer, if a little inelegant! BTW, the 65 works well on 5x4 (a little vignetting) but I mainly wanted to use it for the 6x9 roll film back.

I have a 75mm SA in a recessed board that works on my previously owned Tech IV and my current Tech V, without using the WA adapter.

It of course has the issue of banging into the top of the box, if one tries to use a lot of front rise...

The Technika Master or newer (or a monorail) addresses that issue.

90 is a pain with on my IV. No way would I want a 65 on it. But then I'm too cheap to buy the fancy lens boards.

tim k said:

90 is a pain with on my IV. No way would I want a 65 on it.

Click to expand...

Tim's comment reminded me of one of the other issues I had using my 75mm lens with the Tech IV. The rise mechanism on my IV used a knob, which on a short focal length lens is inside the "box" of the rear standard when focused anywhere near infinity. To do a rise, first I needed to rack it forward enough to access the knob, raise it up by the amount I thought I needed, focus to check the composition, then repeat as required.

My Tech V has a lever arm with a ratchet mechanism for rise, eliminating that effort of racking the lens in and out to access the rise knob. Before I got the Tech V, and still had my Tech IV, I purchased and used a Linhof Color Kardan with a Technika adapter board as an alternate solution for wide angle lenses.

Xander Fischer said:

Anyone know what the minimum draw is ob a linhof technika IV? I'm hoping to use my nikon 65mm on it without having to buy that expensive wide angle adapter... If I got, say, a 20mm recessed board, would that work?

Click to expand...

Not very well. Get a monorail and a bag bellows.