T32 flash with OM10

Would you decribe the way to use T32 flash with OM10?
TTL doesn't support, so mannual auto mode with 5.6F and auto mode in the camera?
THX.

Have a look at this link: http://www.cameramanuals.org/flashes_meters/olympus_t32.pdf Mike Butkus is an invaluable resource to all of us, you will also find a manual for the OM 10 elsewhere on the site. You will find that the T32 will shoot TTL with the OM 10. Have fun!

Unfortunately, it won't work in TTL. The OM10 doesn't have the necessary circuitry nor the extra pin for it.
The OM40 is the only 2 digit amateur to have flash TTL.

I'm sure you are confusing with the ADI system on the 10, basically the same as the -2 series: i.e. TTL with real time measure while exposing the film.
The 10 also has the same pattern of white dots on the first curtain to help the ADI system, It is only used by the Auto aperture priority system for ambient daylight, not for flash.

See page 2 of the manual you linked to for the flash chart with different OMs.

Oops! I stand corrected. I must admit that since I got an OM 4 I haven't used the OM 10 much....