Super 8 B+W Tri-X and Plus-X processed as negative

RJMLuke · Sep 15, 2008

Does anyone know if it is possible to process this S8 film using Microdol-X to render a negative film? I want to develop the film as negative and then invert after a DV transfer. I want to do it this way to avoid having to use a bleach and clearing bath. Can it be done?

Michael W · Sep 15, 2008

I've never done it but Dead Link Removed has a tutorial.
You can also find more info at the Super 8 section of cinematography.com

ic-racer · Sep 16, 2008

When ever I have done this the film is dark from the Anti-halation backing, yet projection prints were still feasible. Probably have to remove the AH backing for DV transfer.

RJMLuke · Sep 28, 2008

What is the best way to take the AH layer off with S8? Thanks

ic-racer · Sep 28, 2008

RJMLuke said:
What is the best way to take the AH layer off with S8? Thanks

I have never done the following but this is a quote from the link goldie posted:

Anti-halation backing
No image visible? It may have the anti-halation on the base, making the film completely opaque (black). It cannot be removed once the film has dried. This will wipe or bleach off while the film is still wet. Try wiping it off with a Chux. You will need to wipe hard. Be as careful as you can not to scratch the emulsion. Alternatively, bleach it off. Pour out 1-2 cups of bleach into a container (eg ice cream carton). Immerse film in bleach. Small black flakes will appear very quickly. As soon as they do, pull film out of bleach and wash under running water. You will still need to wipe it. Timing is critical as the bleach will also be acting on your emulsion.

Christiaan Phleger · Sep 28, 2008

What is used for AH removal in regular B&W processes? That would probably work. IDK if its possible to remove it any other way than a bleach/wipe.

bdilgard · Nov 28, 2009

goldie said:
I've never done it but Dead Link Removed has a tutorial.
You can also find more info at the Super 8 section of cinematography.com

I processed a roll of Super 8 Tri-x pretty much following the procedure in the posted link last winter. I finally got around to posting the results. Didn't know what to use for an audio track so I just left the projector sound in.

[YOUTUBE]http://www.youtube.com/watch?v=-imjF3nyrFQ[/YOUTUBE]

Super 8 B+W Tri-X and Plus-X processed as negative

RJMLuke

Michael W

ic-racer

RJMLuke

ic-racer

Christiaan Phleger

bdilgard

Privacy & Transparency

Privacy & Transparency