Sonar 120mm 4.5 large format lens dust

Brentwood Kebab!

A
Brentwood Kebab!

  • 1
  • 1
  • 76
Summer Lady

A
Summer Lady

  • 2
  • 1
  • 104
DINO Acting Up !

A
DINO Acting Up !

  • 2
  • 0
  • 59
What Have They Seen?

A
What Have They Seen?

  • 0
  • 0
  • 73
Lady With Attitude !

A
Lady With Attitude !

  • 0
  • 0
  • 60

Forum statistics

Threads
198,778
Messages
2,780,735
Members
99,703
Latest member
heartlesstwyla
Recent bookmarks
0

DraganB

Member
Joined
Sep 23, 2023
Messages
96
Location
Switzerland
Format
Medium Format
hi friends,

I have a nice new lens, despite cleaning there are still pockets of dust in the rear lens group. Do these affect the image quality?


22047_llcrop.jpg
22044_llcrop.jpg
 

Don_ih

Member
Joined
Jan 24, 2021
Messages
7,732
Location
Ontario
Format
35mm RF
Are you sure they're not bubbles? I doubt there would be any impact, either way.
 

numerus

Member
Joined
May 2, 2023
Messages
48
Location
Germany
Format
4x5 Format
I also see bubbles. These bubbles were typical for high quality optical glass until the 1960s. I had an Apo-Lanthar that was made in the late 50s that still had these bubbles. I never noticed any effect. The Sonnar is a very nice lens!
 
Last edited:

JPD

Member
Joined
Mar 24, 2007
Messages
2,155
Location
Sweden
Format
Medium Format
Yes, it looks like bubbles. The warranty papers used to say that the warranty did not cover bubbles in the glass, because they were unavoidable when manyfacturing some high quality glass types, and that they won't affect the picture quality.

Is it a Contessa-Nettel Sonnar? According to most sources it's a Tessar-type, but I haven't seen one in person.
 
Last edited:

varg

Subscriber
Joined
Dec 20, 2023
Messages
49
Location
Germany
Format
Large Format
Bubbles in the glass or dust particles can´t have an influence to the image quality, this is physically not possible.
 

Mark J

Member
Joined
Mar 23, 2023
Messages
438
Location
Denbigh, North Wales UK
Format
Multi Format
Your statement is clrearly untrue - of course a bubble would have an effect if it was big enough. However in most cases bubbles are only small, much smaller than the pupil of light coming through to each image point . That's the key.
 

Mark J

Member
Joined
Mar 23, 2023
Messages
438
Location
Denbigh, North Wales UK
Format
Multi Format
Your statement is clrearly untrue - of course a bubble would have an effect if it was big enough. However in most cases bubbles are only small, much smaller than the pupil of light coming through to each image point . That's the key.
 

varg

Subscriber
Joined
Dec 20, 2023
Messages
49
Location
Germany
Format
Large Format
A bubble in the glass has 100 diopter which means that the focus point is inside the bubble, so it has no effect.
You will never find an optical glass with bubbles in sizes which have an influence of the optical quality. This glass will be garbage and never find the way into the lens fabrication.

The case you describe must be a very large bubble, more than 50% of the lens thickness an near to the surface.

Dust particles are without any influence as well. For example, when I get a lens with a chip in the glass or a deep and large scratch I paint it with black colour, This reduces the speed but not the optical system.
 

Mark J

Member
Joined
Mar 23, 2023
Messages
438
Location
Denbigh, North Wales UK
Format
Multi Format
You're talking to an optical designer who specifies bubble/inclusion specs, and surface scratch/dig specs every time a lens design is finished.

"The case you describe must be a very large bubble, more than 50% of the lens thickness an near to the surface."
It looks like now you're rowing back on the blanket statement you made above, which is I was responding to.
 

Whir-Click

Member
Joined
Dec 28, 2013
Messages
57
Format
Large Format
I purchased a lens from around 1915 in its original box and was delighted to find a little manufacturer’s publication on air bubbles tucked inside. A scan is available here.
 
Joined
Jun 7, 2005
Messages
800
Location
Torino, Italy
Format
Large Format
I purchased a lens from around 1915 in its original box and was delighted to find a little manufacturer’s publication on air bubbles tucked inside. A scan is available here.

What a nice little brochure, thanks for sharing!
 

blee1996

Subscriber
Joined
Jul 25, 2008
Messages
1,212
Location
SF Bay Area, California
Format
Multi Format
I purchased a lens from around 1915 in its original box and was delighted to find a little manufacturer’s publication on air bubbles tucked inside. A scan is available here.

That's good info from a reputable manufacturer! I have a Commercial Ektar 12" and a Carl Zeiss Jena Flektogon 35/2.8, both excellent performers despite some tiny air bubbles in the glass elements.
 

Mark J

Member
Joined
Mar 23, 2023
Messages
438
Location
Denbigh, North Wales UK
Format
Multi Format
It was typically the early lanthanum crowns that had bubbles. It took a while before formulations and methods were worked out to combat this problem. Hence the association with top-class lenses having some bubbles.
 
  • Mark J
  • Deleted
  • Reason: dupe
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom