The 35mm f2.5 and the 80mm f4.0 have flat plate glass ports. They are meant for use in both air and under water. All others have domed ports. Refraction at the glass surface of the lens' port bends the light waves by an approximate factor of 1/3 (I'm going from memory here, it could be 1/4!). Because of this, distances under water also appear 1/3 shorter (objects appear 1/3 closer). This can be clearly seen if you dive with a diving mask on. If you remove the mask no refraction occurs and distances are correct.
Under water an image forms at the interface of the port surface with the water. Domed ports preserve the angle of the lens' air optics by stretching and bending the image along the curved surface of the glass, so a 15mm underwater lens is still seeing a 15mm field of view. Domed port lenses are designed to focus on the curved image on the domed port.
A lens with a flat port will not compensate for the refraction index of water, and the angle of view will be narrowed at the glass/water interface. The 35mm's focal length will thus will be "increased" to 46.55 approximately (1/3 longer), but the image will be flat. The lens is designed for the flat image, as on dry land.
Flat port lenses work equally well on land, as the flat glass is just another "filter". Domed port lenses will distort out of water because they are designed for the curved image, but in air the domed port behaves just like a flat port. Thus the optics of the lens, which were designed for the curved image, will distort the image if used in the air.
The 28mm underwater lens has such a slightly curved port it can be used in the air, but it does distort a bit.