Unfortunately, B&H no longer displays the enlargers on the floor, so I cannot go and feel how they are built. I am most probably looking for a used enlarger anyway, but at least you could get an idea of the newer models there.
Requirements: an enlarger that can do 6x7, small enough to be stored in a closet (maybe on a utility cart) and taken to the bathroom for printing. I plan to print b&w only, no larger than 11x14. It should be a currently produced model, or should have been mass produced and sold in US in the past, so that parts would be available for some years.
I really do not shoot 6x7 right now, just 35mm, but I would like to do MF at some point, and would not want the enlarger limitations to dictate the choice of equipment (and rule out Pentax 67). However, an exceptional 6x6 enlarger deal can be considered.
So to help me choose, I ask for comments from users who print in makeshift home conditions on the following models.
1. Omega C-700 appeals to me because it is the smallest thing that can do 6x7. I have limited space, and will need to take it in and out of a closet to a makeshift darkroom (bathroom). They are also quite cheap; even when new they go for $300 with condenser, and they can be found used for close to nothing. It is still produced and parts can easily be found. But I am worried about the build quality: will it last, is the column too wobbly, etc. Can any current users (or former disgruntled users) share their experience? Is alignment easy?
2. The next currently or very recently produced enlargers of more or less "domestic" size are LPL C6600/D6700.
3. There are used Omega models of reasonable size, but I also want something that is still produced, or has recently been mass-produced, so that parts will be available for some years. I was looking at a nice used Omega B8, but its neg carriers and lens cones are unique, and are apparently not even the same as other Omega B series. It's somewhat bigger, (it can print 6x9's) and part availability is a concern.
4. Then there is the Beseler line. The flagship 23C seems too large and heavy for makeshift bathroom use, and the option to consider is the Beseler 67X line. Like this one. Of course, parts for these are also plentiful. Any current users to comment? What is the weight of the thing?
Requirements: an enlarger that can do 6x7, small enough to be stored in a closet (maybe on a utility cart) and taken to the bathroom for printing. I plan to print b&w only, no larger than 11x14. It should be a currently produced model, or should have been mass produced and sold in US in the past, so that parts would be available for some years.
I really do not shoot 6x7 right now, just 35mm, but I would like to do MF at some point, and would not want the enlarger limitations to dictate the choice of equipment (and rule out Pentax 67). However, an exceptional 6x6 enlarger deal can be considered.
So to help me choose, I ask for comments from users who print in makeshift home conditions on the following models.
1. Omega C-700 appeals to me because it is the smallest thing that can do 6x7. I have limited space, and will need to take it in and out of a closet to a makeshift darkroom (bathroom). They are also quite cheap; even when new they go for $300 with condenser, and they can be found used for close to nothing. It is still produced and parts can easily be found. But I am worried about the build quality: will it last, is the column too wobbly, etc. Can any current users (or former disgruntled users) share their experience? Is alignment easy?
2. The next currently or very recently produced enlargers of more or less "domestic" size are LPL C6600/D6700.
- Can anybody explain why the VC model can do 6x7 but the condenser can only house 6x6? LPL site seems to indicate that the only difference is in the light source, so the column and chassis are the same? Does it mean that if I buy the condenser model, I can then still use a dichro head to print 6x7?
- Does it clip on and off the baseboard (for storage), or is it screwed on more or less permanently? If it is, how does the column reversal work?
- Are there alignment screws? I cannot see it in online descriptions.
3. There are used Omega models of reasonable size, but I also want something that is still produced, or has recently been mass-produced, so that parts will be available for some years. I was looking at a nice used Omega B8, but its neg carriers and lens cones are unique, and are apparently not even the same as other Omega B series. It's somewhat bigger, (it can print 6x9's) and part availability is a concern.
4. Then there is the Beseler line. The flagship 23C seems too large and heavy for makeshift bathroom use, and the option to consider is the Beseler 67X line. Like this one. Of course, parts for these are also plentiful. Any current users to comment? What is the weight of the thing?
