Small part storage

Shadow 2

A
Shadow 2

  • 0
  • 0
  • 22
Shadow 1

A
Shadow 1

  • 2
  • 0
  • 21
Darkroom c1972

A
Darkroom c1972

  • 1
  • 2
  • 35
Tōrō

H
Tōrō

  • 4
  • 0
  • 40

Recent Classifieds

Forum statistics

Threads
198,826
Messages
2,781,492
Members
99,718
Latest member
nesunoio
Recent bookmarks
0

Rekusu

Member
Joined
Jun 23, 2024
Messages
60
Location
England
Format
35mm
What ho one and all,

What does one use for storing the small parts and screws from a camera or lens dismantle?

I have found beading storage boxes but they are all deeper than is necessary. Am currently using random screw tops that are 10mm deep and they are fine, but each one is separate. I would like something with a number of compartments with a lid (in case I knock it over and loose bits and bobs.)

Grateful for any suggestions.

Thanks and toodle pip
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,364
Location
Southern California
Format
Multi Format
I put small containers with the small parts in the large storage boxes.
 

grahamp

Subscriber
Joined
Mar 2, 2004
Messages
1,706
Location
Vallejo (SF Bay Area)
Format
Multi Format
My wife keeps her medications in a tray with lid that has seven rows of four compartments and has a lid. What you need to check is if small parts can migrate between compartments when the lid is on. I think this came from the Japanese store Daiso (I'm in California). Easy enough to print a sheet with boxes to write a key to what is where.

For temporary jobs I have a plastic meal tray with sections for different foods. But there is no lid.
 

xkaes

Subscriber
Joined
Mar 25, 2006
Messages
4,791
Location
Colorado
Format
Multi Format
Those compartmented pill boxes are great. They come in a ton of sizes and can be found pretty cheap. I see them as thrift stores all the time.
 

Luckless

Member
Joined
Feb 9, 2016
Messages
1,362
Location
Canada
Format
Multi Format
I have a set of silicone ice 'cube' trays that have lids. They're relatively shallow and shaped for making the long bars of ice to slip in water bottles.

You know, the ones that make the fun daggers to attack the back of your own throat with when they're about 2/3rds melted...

The sides of the segments come up in contact with the lid, so they're fairly reliable at keeping bits in their compartments if the container gets bumped around. I want to get more, but they were sadly a random dollar store find from awhile back.
 

kl122002

Member
Joined
Apr 17, 2022
Messages
391
Location
Hong Kong
Format
Analog
I use small zip bags and label them. Then I group them into box. It more easier to control the room size especially when the pieces are irregular.
 

Dan Daniel

Subscriber
Joined
Jul 4, 2009
Messages
2,883
Location
upstate New York
Format
Medium Format
Look at a local arts store or Amazon or such for bead storage. They are dealing with this issue all the time! Maybe there are better ones than what you have been using?

e.g. https://www.containerstore.com/s?q=beads

I have made small strips of foam if a compartment box doesn't seal each compartment off. Place on lid to create seals when closed.

For an active job, I often use small plastic containers, maybe 3x4 inches with a lid that separates. A box for each subassembly. Most parts simply drop into the bin. Some get put in small bags and put in the bin. And some parts get taped to the inside of the top so I don't lose them. Very helpful, taping parts down. With a clear top to the bin it's easy to see what is under the tape. Use console tape (artist tape).

This is my standard sub-assembly box- https://www.michaels.com/product/gr...imply-tidy-10584306?michaelsStore=1555&inv=20

I also use plastic bags for some sub-assemblies. Side panels, for example- panel and screws.

If you are talking about storage in the process of a camera, not stock storage, pay attention to screw sizes, gears, etc. in disassembly and photograph everything from five angles. You might find that parts are much more distinct than you realize at first glance. Rollei, for example, used a variety of sizes AND threading so that most screws really only fit in one or two types of places. So jumbling them together isn't as horrific as you might think.
 
OP
OP

Rekusu

Member
Joined
Jun 23, 2024
Messages
60
Location
England
Format
35mm
Pill boxes, great idea, Will investigate. Assume it is possible to use a solvent to remove the annoying printed days.

Have also seen in my local 'cheapo' store, boxes that look good but come with 200 'O' rings or 350 cable clips. Tempting but am reluctant to buy as I would be discarding the contents.
 
OP
OP

Rekusu

Member
Joined
Jun 23, 2024
Messages
60
Location
England
Format
35mm
Totally agree. Those film canister were really useful for all kind of things. Unfortunately, the few I still have are black!
 

MTGseattle

Subscriber
Joined
Dec 8, 2013
Messages
1,385
Location
Seattle
Format
Multi Format
I like the film canister idea, and I also like the "pill sorter" idea. My wife found us some 7-day ones that are decently solid and have a nicely positive closure mechanism. While not translucent, the black film cannisters usually had a flat gray lid that was good for labeling.

I think aside from bead storage/sewing, fishing is the other hobby that generates small storage boxes.

For storage and sorting during a project, the silicone ice cube trays mentioned above sound quite good.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
52,935
Location
Delta, BC Canada
Format
Medium Format
Check the crafts aisle at your local "Dollar" store.
 

BobUK

Member
Joined
Oct 13, 2021
Messages
515
Location
England, UK
Format
Medium Format
I have a couple of cheap plastic watercolour paint palettes with folding lids. Not the expensive well known art brands, too expensive.
They came from a bargain art shop.
Also a wooden tray I made with purposely sized compartments to fit the lens and shutter of a 120 folding camera. Sometime there will be a part that does not fit, but that goes to one side in a card tray.
The lid of the wooden tray is just a rectangle of ply wood held in place with a couple of elastic bands.
 
Joined
Jul 31, 2012
Messages
3,352
Format
35mm RF
I prefer the bead type boxes. I have a Minox in one that I disassembled a year ago and it is still all there waiting for me.

if you have a dedicated space that won’t be disturbed, just simply putting tape down on your surface sticky side up and sticking the parts to it as you go works well. You can write on the tape with a sharpie too.
 

gordrob

Subscriber
Joined
Jan 29, 2005
Messages
1,008
Location
Western Cana
Format
Multi Format
Over the years I have collected a lot of part for the Mamiya Press series of cameras and finding storage solutions was fun. I ended up using glass-topped aluminum watchmaker's containers for the small items, screws and springs, then for parts a little bigger I bought some medium and large plastic fishing tackle boxes with adjustable dividers from Bass Pro. Then even larger parts boxes from Home Depot for lens barrels and camera body parts. Keeping track of the parts became a lot easier after I got them organized in these containers and indexed in an Excel worksheet
 

Attachments

  • Mamiya-1.jpg
    Mamiya-1.jpg
    390 KB · Views: 18
  • Mamiya-2.jpg
    Mamiya-2.jpg
    237.2 KB · Views: 18
  • mamiya-3.jpg
    mamiya-3.jpg
    238.4 KB · Views: 19
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom