Sinar P2 camera: size of front standard and bellows?

[Ron (Netherlands)]

Would like to ascertain - for a project - what the size is of the front standard / panel of a Sinar P2 camera (8x10"), and the size of its bellows (for 8x10") at the side of the front standard / panel.

thanks
Ron

ps posted the same question on the LF forum but until now no one revealed the sizes

 

[B.S.Kumar]

I'm not sure i understand what measurements you want, but the front of all the different formats (4x5, 5x7 and 8x10) is the same 140mm square.
It would be easier to answer your question if you post an illustration or photo and be more specific.

Kumar

 

[Ron (Netherlands)]

I'm not sure i understand what measurements you want, but the front of all the different formats (4x5, 5x7 and 8x10) is the same 140mm square.
It would be easier to answer your question if you post an illustration or photo and be more specific.

Kumar

Thank you Kumar, your message answers my question, I indeed wanted to ascertain the square measurement of the front standard, more specifically its outer size (so not the size of the lensboard).

 

[B.S.Kumar]

Ron, I gave you the size of the bellows part. The outer frame that holds the bellows measures 170mm H x 190mm W. Again, this is common to all formats.
This does not include the part below the frame that has the accessory socket.

Kumar

 

[Ron (Netherlands)]

Many thanks Kumar for further explanation