Sinar Norma Instant Backs

Darryl Roberts · Aug 13, 2020

Hi,
Will the Polaroid 405 holder, or a Fuji PA-145 holder work with my Sinar Norma?

Thank you

138S · Aug 13, 2020

Yes, it should. "Graflok 45 has been the de-facto large format accessory mounting standard internationally for the past seventy years"

See this: http://mercurycamera.com/backs/guide-to-graflok-45-backs/

The polaroid holder is thicker than regular holders, so the spring of clamp is more tensioned making more pressure, but the Norma has to take it with no issue.

Regards

Nokton48 · Aug 13, 2020

I have a 405 back, it's a standard Graflok back. So you can attach it with the Graflex clips onto the back of the Norma.

You will need to remove the ground glass back, press in on to the hooked slide locks, and remove the ground glass carefully. Then you can click the 405 on with the Graflex clips..

Darryl Roberts · Aug 13, 2020

Nokton48 said:
I have a 405 back, it's a standard Graflok back. So you can attach it with the Graflex clips onto the back of the Norma.

You will need to remove the ground glass back, press in on to the hooked slide locks, and remove the ground glass carefully. Then you can click the 405 on with the Graflex clips..

Thank you very much

Sinar Norma Instant Backs

Darryl Roberts

138S

Nokton48

Darryl Roberts

Privacy & Transparency

Privacy & Transparency