Simple Q: lens cap size for Konica IIIa 50mm lens

Trask

Subscriber
Joined
Oct 23, 2005
Messages
1,930
Location
Virginia (northern)
Format
35mm RF
I recently picked up a clean Konica IIIa with the 50mm f/1.8 lens. I'll be getting it CLA'd but first I need a lens cap. I'd almost prefer a push-on instead of a clip-in just to avoid any possibility of touching the clean lens.

My ruler says that a push-on would be either 58, 59, or 60mm. A clip-in would be a bit less.

Can anyone confirm the correct size, of either type? I'd certainly appreciate it.
 

Francis in VT

Member
Joined
Sep 27, 2006
Messages
123
Format
35mm
My Hoya filter book lists the Konica IIIA filter size at 43mm.

Tiffen Dealer book lists it as 43M (medium thread).

Neither has a slip-on cap size but from experience
I would cuess at 45-46mm.
 
OP
OP

Trask

Subscriber
Joined
Oct 23, 2005
Messages
1,930
Location
Virginia (northern)
Format
35mm RF
Yes. It'll be a bit pricey to get it CLA'd, as the shutter is sticky, but my preliminary pictures show me that the lens has nice qualities, and man is this thing quiet. I do think it's quieter than my Leica M2 or M3.
 

Christopher Walrath

Member
Joined
Dec 30, 2005
Messages
7,175
Location
Milton, DE USA
Format
Analog
With the thinness of the threads you oughtta just be able to mike it. No calipers handy? Just take it to a local machine/fabrication shop, auto parts store or such. You'll get looks but you'll get your answer as well.
 

John Koehrer

Subscriber
Joined
Apr 3, 2004
Messages
8,277
Location
Aurora, Il
Format
Multi Format
If the filter size is 43mm as mentioned the slip-on cap will have an inside diameter of 45mm. Clip on will be 43mm. You should be able to pick one up for a couple of bucks.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…