Shutter question

[dustym]

The shutter size is not indicated on my camera I have a Linhof snyncro compur I dont know if it is a zero or a one, the lens is a schnieder 210mm

Can anybody help.

rgds
Dusty

 

[Ole]

Which Schneider 210???

The Xenar 210 f:4.5 takes a #3.
The Xenar 210 f:6.1 takes a #1.
The Symmar 210 f:5.6 can be in a #1 or #2, or even a #3 depending on age.
The G-Claron 210 f:9 is also in a #1.

 

[cdholden]

http://www.skgrimes.com/compur/index.htm
This url may help you to identify by visual means.
If you can get measurements, see specs at the bottom of the page.

Hope this helps.
Chris

 

[dustym]

Its the repro claron 1:9.210

 

[Ole]

Its the repro claron 1:9.210

Should be a #1 then. You can check to see if the front and rear cell threads are different - only the #1 size has that among "common" shutters.

 

[jimgalli]

Some of the later Repro Claron's in the 11,000,000 serials are in Copal 0 size. Mounting hole would be about 32mm and some of the earlier ones are in Compur 2 size which has a mounting hold of around 50mm. None are in a #1 size.