Shutter question

dustym

Member

Joined

Oct 16, 2005

Messages

165

Location

Essex, just

Format

Multi Format

• Jul 31, 2006

• #1

The shutter size is not indicated on my camera I have a Linhof snyncro compur I dont know if it is a zero or a one, the lens is a schnieder 210mm

Can anybody help.

rgds
Dusty

 

Ole

Moderator

Moderator

Joined

Sep 9, 2002

Messages

9,245

Location

Bergen, Norway

Format

Large Format

• Jul 31, 2006

• #2

Which Schneider 210???

The Xenar 210 f:4.5 takes a #3.
The Xenar 210 f:6.1 takes a #1.
The Symmar 210 f:5.6 can be in a #1 or #2, or even a #3 depending on age.
The G-Claron 210 f:9 is also in a #1.

 

cdholden

Member

Joined

Aug 9, 2005

Messages

763

Location

Nashville, TN, USA

Format

Multi Format

• Jul 31, 2006

• #3

http://www.skgrimes.com/compur/index.htm
This url may help you to identify by visual means.
If you can get measurements, see specs at the bottom of the page.

Hope this helps.
Chris

 

OP

OP

dustym

Member

Joined

Oct 16, 2005

Messages

165

Location

Essex, just

Format

Multi Format

• Jul 31, 2006

• #4

Its the repro claron 1:9.210

 

Ole

Moderator

Moderator

Joined

Sep 9, 2002

Messages

9,245

Location

Bergen, Norway

Format

Large Format

• Jul 31, 2006

• #5

dustym said:

Its the repro claron 1:9.210

Click to expand...

Should be a #1 then. You can check to see if the front and rear cell threads are different - only the #1 size has that among "common" shutters.

 

jimgalli

Subscriber

Joined

Sep 7, 2002

Messages

4,236

Location

Tonopah Neva

Format

ULarge Format

• Jul 31, 2006

• #6

Some of the later Repro Claron's in the 11,000,000 serials are in Copal 0 size. Mounting hole would be about 32mm and some of the earlier ones are in Compur 2 size which has a mounting hold of around 50mm. None are in a #1 size.